Konverter, micro USB Buchse - UART, CP2102

  • MUSB-UART-CP
  • |
  • 712321341860
  • CHF 5.60

    inkl. MwSt. zzgl. Versandkosten

    Sofort verfügbar ab Zentrallager
    102 Stück · 3 - 5 Werktage

    Variante

    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi pro Kunde erlaubt ist.

    Merken

    Wird oft zusammen gekauft:
    Konverter, micro USB Buchse - UART, CP2102
    Konverter, micro USB Buchse - UART, CP2102
    CHF 5.60
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    CHF 8.75
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    CHF 0.50
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    CHF 1.95
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    CHF 4.15
    =
    Gesamt:
    CHF 20.95*
    inkl.MwSt. zzgl. Versandkosten
    Wird oft zusammen gekauft:
    Konverter, micro USB Buchse - UART, CP2102
    Konverter, micro USB Buchse - UART, CP2102
    CHF 5.60
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
    ESP32-CAM Development Board inkl. OV2640 Kameramodul
       
    CHF 8.75
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    CHF 0.50
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    CHF 1.95
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    CHF 4.15
    =
    Gesamt:
    CHF 20.95*
    inkl.MwSt. zzgl. Versandkosten
    Overview The CP2102 USB UART Board (micro) is an accessory board that features the... mehr
    "Konverter, micro USB Buchse - UART, CP2102"
    Overview

    The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

    CP2102 features:
    • Single-Chip USB to UART Data Transfer
      • No external resistors required, no external crystal required
      • On-chip power-on reset circuit and voltage regulator
      • Integrated 1024-Byte EEPROM
    • USB Function Controller
      • USB Specification 2.0 compliant; full-speed (12 Mbps)
      • USB suspend states supported via SUSPEND pins
    • UART
      • All handshaking and modem interface signals
      • Data formats supported:
        • Data bits: 5, 6, 7, and 8
        • Stop bits: 1, 1.5, and 2
        • Parity: odd, even, no parity
      • Baud rates: 300 bps to 1 Mbits
      • 576 Byte receive buffer; 640 byte transmit buffer
      • Hardware or X-On/X-Off handshaking supported
      • Event character support
    • Virtual COM Port Device Drivers
      • Windows 8/7/Vista/Server 2003/XP/2000
      • MAC OS-X/OS-9
      • Linux 2.40 or higher
    • USBXpress Direct Driver Support
      • Windows 7/Vista/Server 2003/XP/2000
      • WindowsCE
    • Temperature Range
      • –40 to +85 °C

    Features
    • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
    • Voltage output support: 5V or 3.3V
    • Integrated USB protection device: SP0503
    • 3 LEDs: TXD LED, RXD LED, POWER LED
    • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
    • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
    How to Use

    In the case of working with a MCU:
    • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
    • GND: connects to GND
    • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
    • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
    • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
    • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
    Note: VCP examples and USBXpress driver program library are provided.


    Package Content
    • CP2102 USB UART Board (micro) × 1
    • 4-pin male pinheader & 4-pin female pinheader × 2
    • 6-pin custom connector jumper wire × 1

    Development Resources
    Weiterführende Links zu "Konverter, micro USB Buchse - UART, CP2102"
    Daten "Konverter, micro USB Buchse - UART, CP2102"
    Gewicht Brutto (in kg): 0.005
    Artikelnummer: MUSB-UART-CP
    EAN: 712321341860
    Hersteller: Waveshare
    Hersteller Produktnummer: CP2102 USB UART Board (micro)
    Zolltarifnummer: 85444290
    Herkunftsland: China
    Bewertungen lesen, schreiben und diskutieren... mehr
    Kundenbewertungen für "Konverter, micro USB Buchse - UART, CP2102"
    Bewertung schreiben
    Bewertungen werden nach Überprüfung freigeschaltet.
    Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

    Die mit einem * markierten Felder sind Pflichtfelder.

    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (CHF 0.20 / 1 Meter)
    CHF 1.95
    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (CHF 0.14 / 1 Meter)
    CHF 1.35
    Zuletzt angesehen

    Jetzt zum passenden Shop wechseln

    Wir haben festgestellt, dass Sie sich nicht in der Schweiz befinden, und wir Ihnen in unserem Shop für Ihren Standort bessere Versandkonditionen anbieten können.