CHF 40.80
Available · 12 piece · 2-5 days
CHF 40.80
Customers also bought
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 5 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 10 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 3 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 27 piece · 2-5 days
Available · 100+ piece · 2-5 days
Description
Product information "7.0" display for Raspberry Pi with resistive touchscreen"
The display has a resolution of 1024x600 pixels and uses a resistive touchscreen. It can be plugged directly onto all Raspberry Pi models, with the exception of the Raspberry Pi 1 and Raspberry Pi Zero/Zero W. These models require an additional HDMI cable. The power supply and the touchscreen are provided via the GPIO interface of the Raspberry Pi, the image signal is transmitted via HDMI. The display supports various operating systems such as Raspbian and Ubuntu.
It can also be used as a screen for other computers if an HDMI cable is used. In this case, however, the touch function is not active. The backlight can be switched off using a switch. A multilingual OSD menu allows the brightness, contrast and other parameters to be set. A 100-level adjustment of the backlight is also supported. Due to its compact size, the display is suitable for installation in housings or devices.
The display is used to show user interfaces, system information or media content on a Raspberry Pi. Thanks to the touch function, it can be used to control applications directly. The monitor is suitable for use in compact projects where space is limited, e.g. in self-built control units or portable information systems. When used with other devices, the monitor can be used as an output unit, but without touch function.
The product can be used in projects where a Raspberry Pi is to be equipped with an integrated display and input solution. The resistive touchscreen allows precise input by finger pressure or stylus. The connection via GPIO and HDMI enables easy integration into existing systems. The flexible backlighting and screen configuration via OSD extend the range of applications in a wide variety of environments.
Features at a glance
- 7-inch resistive touchscreen with 1024x600 resolution
- Directly attachable to Raspberry Pi (except Pi 1 and Pi Zero/Zero W)
- Touch and power supply via GPIO, image transmission via HDMI
- Also works with other computers via HDMI (without touch function)
- Backlight switchable and 100-level adjustable
- Multilingual OSD menu for screen settings
- Raspberry Pi 2/3/4/400
- Raspberry Pi Zero/Zero W (with HDMI cable)
- Computer with HDMI output (display only)
- Operating systems: Raspbian, Ubuntu
- Resolution: 1024x600 pixels
- Touch type: Resistive
- Image signal: HDMI
- Touch and power supply: GPIO
- Backlight: 100-level adjustable, can be switched off via switch
- Menu control: Multilingual OSD
- GPIO pin assignment for touchscreen and power supply:
Power supply:
- Pin 1, 17: 3.3V (positive power supply)
- Pin 2, 4: 5V (positive power supply)
- Pin 6, 9, 14, 20, 25: GND (ground connection)
Touch panel SPI connection:
- Pin 19: TP_SI (data input of the touch panel, SPI)
- Pin 21: TP_SO (data output of the touch panel, SPI)
- Pin 22: TP_IRQ (interrupt line, activated on touch)
- Pin 23: TP_SCK (SPI clock line of the touch panel)
- Pin 26: TP_CS (chip select line, active at low level)
Not assigned (NC - No Connection):
- Pin 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24
- Display
- HDMI adapter / connector
- Touch pen
- Screw set
Properties
| Zolltarifnummer: | 85312095 |
|---|---|
| Brand: | Waveshare |
| Compatibility: | Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi 3B, Raspberry Pi 3A+ |
| Country of Origin: | China |
| Display Size: | 7,0 Zoll |
| EAN: | 4251266751663 |
| Gross Weight (kg): | 0.322 |
| Manufacturer ID: | 7inch HDMI LCD |
| Product ID: | 125166 |
Manufacturer
Waveshare
Waveshare: High quality modules for your Raspberry Pi
Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.
Waveshare provides an optimal view
You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.
For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.
If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.
Compact and of brilliant quality: The Waveshare 7 inch Display
The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.
At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.
Waveshare Game HAT: Turning your Raspberry Pi into a game console
One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.
If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.
Practical accessories for every purpose
By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.
Manufacturer and safety information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com
WEEE number: 72769965
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Ensure that the device is placed on a non-conductive surface during use to avoid short circuits.
- Avoid overvoltage: Check the correct voltage settings of your system.
- Keep the product away from moisture, water or other liquids.
- Children should only use the product under adult supervision.
- When handling GPIO pins, ensure correct wiring to prevent damage to the hardware.
- Disconnect the power supply to the Raspberry Pi before manipulating it (e.g. connecting or disconnecting cables).
- Avoid direct sunlight or extreme temperatures to prevent damage to the display and electronics.
- In the event of a defect, do not repair it yourself, but contact the manufacturer or specialised personnel.
- Dispose of in accordance with local regulations for electronic waste.
- Dispose of electronic components in an environmentally friendly manner in accordance with WEEE guidelines.
Reviews 1
Login
1 review
6 April 2022 00:00
-
-
Accessories
Available · 86 piece · 2-5 days
Available · 100+ piece · 2-5 days
Customers also viewed
Available · 44 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 15 piece · 2-5 days
Available · 22 piece · 2-5 days
Available · 17 piece · 2-5 days
Available · 100+ piece · 2-5 days
