Adafruit NeoPixel Ring - 12 x 5050 RGBW LEDs with integrated drivers, natural white
Product number: ADA2852
CHF 8.65
Available · 14 piece · 2-5 Tage
CHF 8.65
Customers also bought
Available · 11 piece · 2-5 Tage
Available · 12 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 10 piece · 2-5 Tage
Available · 9 piece · 2-5 Tage
Available · 12 piece · 2-5 Tage
.png?ts=1730726863){kind=logo}
Available · 62 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 3 piece · 2-5 Tage
Available · 2 piece · 2-5 Tage
Available · 55 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 64 piece · 2-5 Tage
Available · 5 piece · 2-5 Tage
Description
Product information "Adafruit NeoPixel Ring - 12 x 5050 RGBW LEDs with integrated drivers, natural white"
12 ultra-bright, intelligent LED NeoPixels are arranged in a circle with 1.45" (37 mm) outer diameter. The rings are 'daisy-chainable' - connect the output pin of one to the input pin of the other. Use only one microcontroller pin to control as many as you can daisy-chain together! Each LED is addressable as the driver chip is inside the LED. Each has a ~18mA constant current driver, so the colour is very consistent even if the voltage varies, and no external choke resistors are required, making the design sleek. Power the whole thing with 5VDC and you're ready to rock.
The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with yellow phosphor. Unlit, it resembles an egg yolk. When lit, these are insanely bright and can be controlled with 8-bit PWM per channel (8 x 4 channels=32-bit colour in total). Great for adding lots of colourful + white dots to your project !
NeoPixel LEDs use the 800 KHz protocol, so special timing is required. For NeoPixels, the PWM rate is ~400 Hz, which works well but is noticeable when the LED moves.
NeoPixels are 5050 large LEDs with an embedded microcontroller inside the LED. You can adjust the brightness and colour of each R/G/B/W with 8-bit PWM precision (i.e. 32-bit colours per pixel) . The LEDs are controlled by shift registers and only 1 digital output pin is needed, to send data downwards. The PWM is built into each LED chip so once a colour has been set it will modulate accordingly even if it is no longer being driven.
We have a tutorial showing the wiring, power consumption calculations, example code for use etc for NeoPixel. Please note that you need a NeoPixel library with RGBW support, which is not always available. If you try to control these with a simple 'RGB' NeoPixel library you will get very strange results. Our Adafruit NeoPixel library does support RGBW, but if you use anything else, be aware that this may require hacking. Our detailed NeoPixel Uberguide contains everything you need to use NeoPixels in any shape or size. Includes ready-to-use library and sample code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)
Supplied as a single ring of 12 individually addressable RGB LEDs that have been assembled and tested.
Properties
| Zolltarifnummer: | 85414090 |
|---|---|
| Brand: | Adafruit |
| Country of Origin: | China |
| EAN: | 4060137025198 |
| Gross Weight (kg): | 0.004 |
| Manufacturer ID: | 2852 |
| Product ID: | ADA2852 |
Manufacturer
Adafruit
Adafruit: The expert for open source hardware
For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.
Light comes into the dark with Adafruit NeoPixel
One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.
Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.
With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.
Adafruit Feather Boards: Powerful hardware in a compact format
With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.
The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.
Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.
With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.
Adafruit: What's behind the brand
As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.
Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!
Manufacturer and safety information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before commissioning, ensure that the power supply corresponds to the specifications of the product (e.g. 5V operating voltage).
- Do not bring into contact with water or moisture, as this can lead to short circuits.
- Do not operate the LEDs above the maximum specified current to avoid overheating.
- Avoid direct contact during operation as the product may heat up.
- Never use the device without an appropriate current limiter or voltage regulator.
- If the product is damaged, do not put it into operation to avoid short circuits or safety risks.
- Do not tamper with or make any unauthorised changes to the product.
- Dispose of in accordance with local electronics and environmental regulations - do not dispose of electrical waste with household waste.
- If swallowed or otherwise misused, keep the product away from children.
- Only carry out work on the electrical system when it is de-energised.
Reviews 0
Login
Similar Items
Available · 2 piece · 2-5 Tage