Adafruit RGB Matrix Bonnet for Raspberry Pi
Product number: ADA3211
CHF 13.55
Available · 16 piece · 2-5 Tage
CHF 13.55
Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 17 piece · 2-5 Tage
Content: 10 Stück (CHF 0.22 / 1 Stück)
Available · 100+ piece · 2-5 Tage
Available · 9 piece · 2-5 Tage
Available · 76 piece · 2-5 Tage
Available · 10 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 5 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Content: 10 Stück (CHF 0.49 / 1 Stück)
Available · 68 piece · 2-5 Tage
Available · 11 piece · 2-5 Tage
Description
Product information "Adafruit RGB Matrix Bonnet for Raspberry Pi"
"Bonnet" cards work on any Raspberry Pi with a 40-pin GPIO header - Zero, Zero W/WH, Model A+, B+, Pi 2, Pi 3 and Pi 4.
They will not work with older 26-pin boards such as the original Model A or B. Note that with the Pi Zero, you may need to solder a header to the Pi board; this is not normally fitted to this model.
This bonnet makes your matrix projects super simple and avoids the hassle of wiring:
- Simple design - plug in power, plug in IDC cable, run our Python code!
- Power protection circuit - you can plug a 5V 4A power supply into the Bonnet and it will automatically protect against negative, over or under voltage! Hooray for no accidental destruction of your setup.
- Onboard level converter to convert the 3.3V to 5.0V logic of the RasPi for clean and interference-free matrix control
- Pre-assembled compact design no soldering required! Connects to any Raspberry Pi with a 2x20 connector.
Please note: This bonnet is only suitable for use with HUB75 type RGB matrices. Not for use with NeoPixel, DotStar or other "addressable" LEDs. Each order comes with a fully assembled and ready to use bonnet with all parts.
RGB matrix not included
A 5V power supply is also required, not included, to power the matrix itself , the Pi cannot do this. To calculate the power, multiply the width of all concatenated matrices * 0.12 Amps : A 32 pixel wide matrix can end up drawing 32*0.12=3.85A, so take a 5V 4A power supply. The actual power consumption depends on how many LEDs you light up at once.
RaspberryPi not included
There is a full manual with installation, software, datasheets, EagleCAD PCB files, fritzing objects and more!
Properties
| Zolltarifnummer: | 85423919 |
|---|---|
| Brand: | Adafruit |
| Compatibility: | Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi Zero WH, Raspberry Pi 3B, Raspberry Pi 3A+, Raspberry Pi Zero W, Raspberry Pi Zero |
| Country of Origin: | USA |
| EAN: | 5906623430079 |
| Gross Weight (kg): | 0.015 |
| Manufacturer ID: | 3211 |
| Product ID: | ADA3211 |
Manufacturer
Adafruit
Adafruit: The expert for open source hardware
For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.
Light comes into the dark with Adafruit NeoPixel
One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.
Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.
With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.
Adafruit Feather Boards: Powerful hardware in a compact format
With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.
The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.
Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.
With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.
Adafruit: What's behind the brand
As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.
Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!
Manufacturer and safety information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com
WEEE number: 20453810
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Avoid contact with water or moisture, as electronic components may be damaged.
- Only use the product in a safe environment with adequate ventilation to prevent overheating.
- Ensure that no metal objects come into contact with the GPIO pins, as this can cause short circuits.
- Use ESD protection measures to protect electrical components from static discharges.
- Only use with compatible Raspberry Pi models and ensure correct pin assignment during installation.
- Always disconnect the power supply to the Raspberry Pi before plugging in or removing the HAT or breakout.
- Check the maximum current consumption of connected components to avoid overloading or damage to the Raspberry Pi.
- Dispose of the product in an environmentally friendly manner in accordance with the applicable regulations for electronic components.
- If there is visible damage to the product, stop using it immediately to prevent accidents or further damage.
Reviews 0
Login
Customers also viewed
Available · 13 piece · 2-5 Tage