Adafruit STEMMA QT / Qwiic - 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
Product number: ADA4646
CHF 27.15
Available · 22 piece · 2-5 Tage
CHF 27.15
Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 1 piece · 2-5 Tage
.png?ts=1730726863){kind=logo}
Available · 9 piece · 2-5 Tage
Available · 1 piece · 2-5 Tage
.png?ts=1730377780){kind=logo}
Available · 67 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 35 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 15 piece · 2-5 Tage
Available · 10 piece · 2-5 Tage
Description
Product information "Adafruit STEMMA QT / Qwiic - 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055"
Bosch is the first company to tackle this problem by putting a MEMS accelerometer, magnetometer and gyroscope on a single chip along with a high-speed ARM Cortex-M0-based processor that digests all the sensor data, abstracts the sensor fusion and real-time requirements, and spits out data you can use in quaternions, Euler angles or vectors.
Instead of spending weeks or months fiddling with algorithms of varying accuracy and complexity, you can get meaningful sensor data in minutes with the BNO055 - a smart 9-DOF sensor that does the sensor fusion all by itself!
You can read out the data directly via I2C, and you're done.
The BNO055 can output the following sensor data:
- Absolute orientation (Euler vector, 100Hz) Triaxial orientation data based on a 360° sphere
- Absolute Orientation (Quatenrion, 100Hz) Four-point quaternion output for more accurate data manipulation
- Angular Velocity Vector (100Hz) Three axes of 'rotational velocity' in rad/s
- Acceleration Vector (100Hz) Three axes of acceleration (gravity + linear motion) in m/s^2
- Magnetic field strength vector (20Hz) Three axes of magnetic field scanning in micro-Tesla (uT)
- Linear acceleration vector (100Hz) Three axes of linear acceleration data (acceleration minus gravity) in m/s^2
- Gravity vector (100Hz) Three axes of gravitational acceleration (minus one movement) in m/s^2
- Temperature (1Hz) Ambient temperature in degrees Celsius
Best of all, you can get started in 10 minutes with our handy tutorial on assembly, wiring, CircuitPython & Arduino libraries, graphical processing interface and more!
Properties
| Zolltarifnummer: | 85423911 |
|---|---|
| Brand: | Adafruit |
| Country of Origin: | USA |
| EAN: | 4060137065200 |
| Gross Weight (kg): | 0.004 |
| Manufacturer ID: | 4646 |
| Product ID: | ADA4646 |
Manufacturer
Adafruit
Adafruit: The expert for open source hardware
For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.
Light comes into the dark with Adafruit NeoPixel
One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.
Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.
With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.
Adafruit Feather Boards: Powerful hardware in a compact format
With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.
The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.
Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.
With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.
Adafruit: What's behind the brand
As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.
Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!
Manufacturer and safety information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com
WEEE number: 20453810
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Protect sensors from moisture, extreme temperatures and direct sunlight.
- Avoid static charging by taking suitable measures to prevent damage to electronic components.
- Only operate with the recommended voltages and connections to avoid short circuits or overheating.
- Do not disassemble, modify or forcibly open the product.
- Keep away from small children; contains small parts that could be swallowed.
- Do not use in potentially explosive atmospheres or in the vicinity of flammable materials.
- Do not use defective or damaged sensors/modules in operation.
- Dispose of in accordance with local regulations for electronic waste.
- Carefully check reusable components before disposal.
Reviews 1
Login
1 review
23 August 2022 00:00
-
-
Customers also viewed
Available · 43 piece · 2-5 Tage
Available · 10 piece · 2-5 Tage
