Skip to main content Skip to search Skip to main navigation
Lightning-fast shipping until 14:00 Lightning shipping by 14:00
Free shipping from CHF 200
Support B2B Shop Education

Description

Product information "Adafruit Stereo 2.1W Class D Audio Amplifier - TPA2012"

This incredibly small stereo amplifier is surprisingly powerful - it can deliver 2 x 2.1 W channels to speakers with 4 Ohm impedance (at 10% THD). Inside the miniature chip is a Class D controller that can operate from 2.7V-5.5VDC. Because it's a Class-D amplifier, it's incredibly efficient (89% efficiency when driving an 8Ω speaker at 1.5 watts) - making it perfect for portable and battery-powered projects. It has built-in overheat and overcurrent protection, but we could barely tell it was getting hot. This board is a welcome upgrade to basic "LM386" amplifiers!

The inputs of the amplifier go through 1.0uF capacitors, so they are fully "differential" - if you don't have differential outputs, just tie the R and L to ground. The outputs are "Bridge Tied" - that is, they are connected directly to the outputs, no connection to ground. The output is a ~300KHz square wave PWM which is then "averaged out" by the speaker coil - the high frequencies are not heard. All this means you can't connect the output to another amplifier, it should drive the speakers directly.

Included is a fully assembled and tested breakout board with 1.0uF input capacitors. We've also included a dual mini DIP switch for adjusting the amplifier gain on the fly, 3.5mm screw terminal blocks so you can easily attach/remove your speakers, and some headers in case you want to plug it into a breadboard. In 15 minutes you are ready to rock! Speakers are not included, use any speakers with 4 or 8 Ohm impedance.
  • Output power: 2.1 W at 4Ω, 10% THD, 1.4 W at 8Ω, 10% THD, with 5V supply
  • PSRR: 77 dB typ @ 217 Hz with 6 dB gain
  • Designed for use without output filter when cables are less than 2"-4" long
  • Four pin selectable gains: 6dB, 12dB, 18dB and 24dB. Selection is made with the integrated switches or by setting the G0 and G1 breakout pins (see breakout board schematic with gain pin settings for details)
  • Excellent click-and-pop suppression
  • Thermal shutdown protection
  • Independent channel shutdown
  • Low current consumption: typically 6mA in sleep mode and 1.5uA in shutdown mode
Check out the tutorial for more details!

Note: The supplied terminals can be blue or black.

Properties

Zolltarifnummer: 85423199
Brand: Adafruit
Country of Origin: USA
Gross Weight (kg): 0.006
Manufacturer ID: 1552
Product ID: ADA1552

Manufacturer

Adafruit

Adafruit – the open-source hardware pioneer

Adafruit Industries was founded in New York in 2005 by MIT engineer Limor Fried and has since become one of the most influential companies in the maker world. Its mission: making electronics understandable and accessible to everyone – with open-source hardware, free tutorials and a community of millions.

Every Adafruit product is designed, tested and manufactured in the company's own factory in New York. The result is boards and modules that are known for their thoughtful design, excellent documentation and reliable software support – from the Feather ecosystem to the STEMMA QT plug-and-play system.

BerryBase is an official Adafruit reseller. Here you will find genuine products and the expertise to get your project off the ground – whether you are just starting out or developing professionally.

Manufacturer and safety information

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com

WEEE number: 20453810

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions
  • Avoid direct mechanical stress or damage to the product.
  • Only use the product in accordance with the manufacturer's instructions and specifications.
  • Protect the product from moisture, extreme heat or cold.
  • Do not operate in potentially explosive atmospheres unless expressly designed for this purpose.
  • Ensure correct cabling and prevent short circuits.
  • Only use compatible voltage sources and power supply units.
  • Keep the product away from strong sources of electromagnetic interference.
  • Avoid direct contact with water- or solvent-based substances.
  • Dispose of the product in accordance with the applicable environmental and electronics regulations.
  • Carry out recycling in accordance with the WEEE Directive or local regulations.
  • For products with batteries, remove them before disposal and recycle them separately.
  • Do not dispose of with household waste; use specialised recycling centres.

Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers also viewed

Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306 Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306
Adafruit
ADA987
Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306

CHF 8.20
Available · 6 piece · 2-5 days
PAM8403 Class D mini amplifier module 2x 3W PAM8403 Class D mini amplifier module 2x 3W
Frei
XH-M179
PAM8403 Class D mini amplifier module 2x 3W

CHF 1.05
Available · 100+ piece · 2-5 days

Our recommendations for you

Loading...