CHF 10.90
Currently not available
CHF 10.90
Customers also bought
Available · 58 piece · 2-5 days
Available · 5 piece · 2-5 days
Available · 2 piece · 2-5 days
Available · 2 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 4 piece · 2-5 days
Available · 16 piece · 2-5 days
Available · 30 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 10 piece · 2-5 days
Available · 10 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 99 piece · 2-5 days
Available · 100+ piece · 2-5 days
Description
Product information "BMP280 Temperature, pressure, altitude sensor breakout "
If you are looking for a simple temperature and pressure sensor, then this is the right choice. It's cheap and accurate (±1 hPa, ±1.0°C, ±1 metre), and ideal for keeping an eye on temperatures around your house or even for measuring altitude when ballooning at high altitude.
It's compatible with our nifty Breakout Garden HAT, where using breakouts is as simple as plugging it into one of the six slots, creating projects and coding.
Features
- Bosch BMP280 Temperature, pressure, height sensor
- I2C interface, with address selection via ADDR cuttable trace (0x76 or 0x77)
- 3.3V or 5V compatible
- Reverse polarity protection
- Raspberry Pi compatible pin assignment (pins 1, 3, 5, 7, 9)
- Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
- Python library
- Data table
- BMP280 Breakout
- 1x5 pin header
- 1x5 right angle female header
Software
Our Python library for the BMP280 makes it easy to take readings from the sensor and combine them with code for our other breakout garden breakouts and even other HATs and pHATs on a pHAT stack.
Our software does not support Raspbian Wheezy.
Notes
- The solder pads (labelled ADDR) can be bypassed to change the I2C address from the default 0x76 to 0x77, which means you can use up to two sensors on the same Raspberry Pi or Arduino
- The BME680 and BMP280 breakouts share the same I2C addresses, so if you are using both together you will need to change the I2C address on one of them using the solder bridge/pads
- Dimensions: 19x19x2.75mm (LxWxH)
Properties
| Zolltarifnummer: | 85366990 |
|---|---|
| Brand: | Pimoroni |
| Country of Origin: | Great Britain |
| EAN: | 0606034878501 |
| Gross Weight (kg): | 0.004 |
| Manufacturer ID: | PIM411 |
| Product ID: | PIM411 |
Manufacturer
Pimoroni
Optimize your Raspberry Pi - with Pimoroni
Pimoni is the expert when it comes to equipping your Raspberry Pi with high-quality add-on modules. The successful company was founded in 2012 in Sheffield, England, and now also has a branch in Essen, Germany. According to the University of Sheffield, Pimoroni is even considered one of the fastest growing manufacturing companies in the UK.
The electronics specialist has the right solution for almost every need around the Raspberry Pi. The product range also includes the Pimoroni Fan Shim, a powerful 30mm CPU fan for the Raspberry Pi, which is one of the top sellers from Pimoroni. The Fan Shim manages a powerful 4,200 RPM and delivers significant added value by optimizing the thermal performance of your Raspberry Pi. Compatibility exists with the Raspberry Pi 4, but also with the 3 B+ and 3 A+ models.
The fan is equipped with RGB LED and a tactile switch, making it wonderfully controllable. The LED serves as an indicator to track the fan status and CPU load/temperature. The tactile switch is also handy: With the help of the included Python library and a daemon, you can program it to switch between temperature-controlled automatic mode and manual mode. Thanks to its "friction-fit" header, the Pimoroni Fan Shim can easily be plugged onto the pins of your mini computer and is ready to go without soldering. In general, the installation is uncomplicated and should not take more than two minutes. While the fan is doing its job, the noise level is very low: The maximum value is only 18.6 dB.
Apart from the Pimoroni Fan Shim, many other top products from Pimoroni are available at Berrybase. The Pibow Coupé 4 is recommended for all owners of a Raspberry Pi 4: The compact case reliably protects your mini computer from external influences like dust or shocks. All ports remain open and thus accessible. The high-quality processed and easy to mount frame for the official 7" Raspberry Pi touchscreen display also fulfills its protective function perfectly. With the Pirate Audio HAT you get a first-class 3W stereo amplifier for your mini computer: Use the module in combination with your Raspberry Pi and your speakers to control the playback of your favorite music and to create powerful sound.
Depending on what you have in mind, you can also use other modules from Pimoroni, such as LED sensors, camera modules or the Pico HAT Hacker.
Manufacturer and safety information
Pimoroni Ltd.
Unit 1, Parkway One Business Park
GB S9 4WN Sheffield
https://shop.pimoroni.com
mark@pimoroni.com
WEEE number: 20453810
Responsible person for the EU
See manufacturer information
Safety instructions
- Only install and use the sensor in accordance with the manufacturer's recommendations.
- Disconnect the power supply before installation or maintenance.
- Protect from direct contact with water or moisture.
- Do not disassemble or repair independently, as this may impair functionality and safety.
- Observe the temperature range of the sensor to avoid damage and malfunctions.
- In the event of malfunction or damage, only replace by qualified specialists.
- Dispose of used sensors in an environmentally friendly manner in accordance with local regulations.
- Dispose of electronic and plastic parts at authorised recycling stations.
- Ensure that the sensor does not measure any dangerous temperatures that could cause material damage.
Reviews 1
Login
1 review
26 May 2021 00:00
So wie erwartet gut! Voll zufr...
So wie erwartet gut! Voll zufrieden. Funktioniert.
Customers also viewed
Available · 1 piece · 2-5 days