Description
Product information "DFRobot Passive cooling case made of aluminium alloy for LattePanda Alpha & Delta"
Four external fan holes are reserved on the case so that you can conveniently add a fan, such as 4010, 4012 fans. (Recommended fan dimensions: 40 x 40mm with 32 ±0.3mm hole, M3 screws)
Note:
1. Please remove the pre-installed fan of the LattePanda Alpha or Delta when using the aluminium case.
2. For your safety, please DO NOT touch the case directly during use to avoid burns.
3it is normal for the copper heat sink to turn black after being used for a long time; those who are bothered by it can polish it with sandpaper.
Features
- Passive cooling Aluminium alloy housing with good heat dissipation
- All connectors and GPIO reserved, perfectly suitable for LattePanda Alpha & Delta
- Four fan holes are reserved in the top cover; fans with a side length of 400 mm; the centre-to-centre distance of the holes is 32 mm
- With high-quality silicone grease and copper heat sink, we offer you perfect heat dissipation.
- Reinforced aluminium material, lightweight and durable
- Easy to install
- Ultra-thin design
- Material: Aluminium alloy
- Size: 11.5x7.8x1.8cm
- Compatible with: LattePanda Alpha & LattePanda Delta
- Aluminium alloy case for LattePanda board x1
- Copper heat sink (15*15mm) x1
- 1g silicone thermal compound x1
- Note: The LattePanda Alpha or Delta board and the fan are not included.
Installation guide
Properties
| Zolltarifnummer: | 84733080 |
|---|---|
| Brand: | DFRobot |
| Country of Origin: | China |
| EAN: | 6959420915484 |
| Gross Weight (kg): | 0.188 |
| Manufacturer ID: | FIT0631 |
| Product ID: | FIT0631 |
Manufacturer
DFRobot
DFRobot – open-source hardware for makers and education
DFRobot was founded in Shanghai in 2008 and is one of the world's leading providers of open-source hardware and robotics solutions. The company's aim is to lower the barriers to electronics and to inspire people of all ages to create and learn.
The brand is known for its Gravity sensor system with standardised plug connectors, the Boson modules for STEM education and the LattePanda single-board computers with Windows support. All products are well documented and backed by an active global community.
At BerryBase you will find a selection of DFRobot products for prototyping, teaching and robotics – from individual sensors to complete kits.
Manufacturer and safety information
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
WEEE number: 20453810
Person responsible for the EU
See manufacturer information
Safety instructions
- Avoid contact with electrical components, only assemble/disassemble the device when it is de-energised.
- Do not use in damp or wet environments to avoid short circuits.
- Protect the board from overloading, use suitable power supply units with the correct voltage and current.
- The board can become hot during operation, protect against burns.
- Avoid direct contact with conductive materials to prevent short circuits.
- Do not operate in the vicinity of flammable or combustible materials.
- Ensure that all cables are properly and securely connected.
- Only use at room temperature, avoid extreme temperatures.
- If the appliance is damaged, stop using it immediately.
- For disposal, follow the local legal disposal guidelines for electronic devices.
- Dismantling the device can be dangerous, refrain from improper manipulation.
- Dispose of rechargeable batteries or batteries, if present, separately in accordance with the regulations.
Reviews 0
Login