INA219 High Side DC Voltage Sensor Breakout, 26V ±3.2A Max
Product number: ADA904
CHF 9.95
Available · 20 piece · 2-5 Tage
CHF 9.95
Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 28 piece · 2-5 Tage
Available · 34 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 5 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 2 piece · 2-5 Tage
Available · 8 piece · 2-5 Tage
Available · 34 piece · 2-5 Tage
Available · 13 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Content: 10 Meter (CHF 0.11 / 1 Meter)
Available · 100+ piece · 2-5 Tage
Available · 12 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 15 piece · 2-5 Tage
Content: 10 Meter (CHF 0.19 / 1 Meter)
Available · 100+ piece · 2-5 Tage
Available · 13 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Description
Product information "INA219 High Side DC Voltage Sensor Breakout, 26V ±3.2A Max"
Most current meters, like our current meter, are only suitable for the low side. This means that you have to clamp the measuring resistor between the target ground and the real ground if you don't want to include a battery. This can cause problems with circuits as the electronics don't like it when the ground references change and move with varying current draw. This chip is much smarter - it can make high-side current measurements, up to +26VDC, even when powered by 3 or 5V. It also reports back this high-side voltage, which is great for monitoring battery life or solar panels.
A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. Since the amplifier's maximum input difference is ±320mV, this means it can measure up to ±3.2 amps. With the internal 12-bit ADC, the resolution in the ±3.2A range is 0.8mA. When the internal gain is set to the minimum of div8, the maximum current is ±400mA and the resolution is 0.1mA. Advanced hackers can remove the 0.1 ohm current sense resistor and replace it with one of their own to change the range (e.g. a 0.01 ohm resistor to measure up to 32 amps with a resolution of 8mA)
We include a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal connector so you can easily attach and detach your load.
It's easy to use. Supply the sensor itself with 3 to 5VDC and connect the two I2C pins to your microcontroller. Then connect your target power supply to VIN+ and the load to VIN-. We have a detailed tutorial that does all the gain, range and maths for you - just plug and play with Arduino or CircuitPython!
As if that wasn't enough, we now also have SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder the I2C and power lines.Just wire up your favourite micro with a STEMMA QT adapter cable.
QT cable is not included.
Properties
| Zolltarifnummer: | 85423111 |
|---|---|
| Brand: | Adafruit |
| Country of Origin: | USA |
| EAN: | 5904422379377 |
| Gross Weight (kg): | 0.004 |
| Manufacturer ID: | 904 |
| Product ID: | ADA904 |
Manufacturer
Adafruit
Adafruit: The expert for open source hardware
For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.
Light comes into the dark with Adafruit NeoPixel
One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.
Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.
With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.
Adafruit Feather Boards: Powerful hardware in a compact format
With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.
The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.
Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.
With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.
Adafruit: What's behind the brand
As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.
Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!
Manufacturer and safety information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
support@adafruit.com
WEEE number: 20453810
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Always install and operate sensors and modules in accordance with the manufacturer's instructions.
- Always switch off the power supply before installation or maintenance.
- Avoid direct contact with electrical connections to prevent electric shocks.
- Only use in dry and suitable environments to avoid short circuits or malfunctions.
- Check the device for damage or defects before use.
- Do not operate above the specified voltage and current.
- In the event of malfunctions, disconnect the appliance from the power supply immediately.
- Dispose of in accordance with local electrical and electronic waste regulations.
- Do not dispose of in normal household waste as it may contain hazardous substances.
- Keep children away from the product to prevent misuse or injury.
Reviews 0
Login
Customers also viewed
Available · 18 piece · 2-5 Tage