Metal film resistor, 33.0 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting
Product number: MSW33K.25
CHF 0.05
Available · 72 piece · 2-5 days
CHF 0.05
Customers also bought
Available · 100+ piece · 2-5 days
Available · 87 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
.png?ts=1730726863){kind=logo}
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 15 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 65 piece · 2-5 days
Available · 100+ piece · 2-5 days
Content: 10 Meter (CHF 0.19 / 1 Meter)
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 27 piece · 2-5 days
Available · 8 piece · 2-5 days
Available · 1 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 100+ piece · 2-5 days
Description
Product information "Metal film resistor, 33.0 kOhm, 1/4W, ±1%, 0207, axial, through-hole mounting"
| Manufacturer | Free |
| Resistor type | Metal layer |
| Mounting | Through-hole mounting |
| Power (70°C) | 0,25W |
| Power (125°C) | 0,1W |
| Operating voltage (AC/DC max., 70°C) | 250V |
| Short-term limit voltage (70°C) |
500V |
| Tolerance | ±1% |
| Design | 0207 |
| Wiring | axial |
| IEC colour code | 4 rings |
| Version | loose |
Properties
| Zolltarifnummer: | 85332100 |
|---|---|
| Brand: | Frei |
| Country of Origin: | Taiwan |
| Form Factor: | axial |
| Gross Weight (kg): | 0.001 |
| Mounting: | THT |
| Power: | 0.25W |
| Product ID: | MSW33K.25 |
| Resistance: | 33,0 kOhm |
| Tolerance: | ±1% |
| Type: | Metal Fim Resistor |
Manufacturer and safety information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Person responsible for the EU
See manufacturer information
Safety instructions
- When handling resistors, observe the voltage and current of the circuit to avoid overloading and overheating.
- Only use for the intended power and temperature range.
- Before installation, ensure that the resistor is free from damage.
- When using in electronic circuits, observe the polarity if necessary (e.g. for certain networks).
- De-energise the circuit before carrying out repair or replacement work.
- Do not continue to use defective or burnt resistors and replace them immediately.
- Dispose of resistors properly and in an environmentally friendly manner in accordance with local regulations.
- Do not reuse damaged products or external components after mechanical stress.
- Do not store or use in damp or extremely dusty environments.
Reviews 0
Login