Octo WS2811 adapter for Teensy 3.2 - 4.1 and NeoPixel
Product number: ADA1779
CHF 10.80
Available · 19 piece · 2-5 days
CHF 10.80
Customers also bought
Available · 7 piece · 2-5 days
Available · 18 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 20 piece · 2-5 days
Available · 8 piece · 2-5 days
Description
Product information "Octo WS2811 adapter for Teensy 3.2 - 4.1 and NeoPixel"
It features a 74HCT245 buffer chip and 100 ohm series matching resistors. A CAT6 Ethernet cable is used to connect this board to the LED strips. A CAT6 cable is designed for very high bandwidth, minimal crosstalk between the twisted pairs and an impedance of 100 ohms to ensure very high signal quality.
This product does NOT include a Teensy, it is only the adapter!
Properties
| Zolltarifnummer: | 85423111 |
|---|---|
| Brand: | PJRC |
| Color: | green |
| Compatibility: | Teensy 3.2, Teensy 4.1 |
| Country of Origin: | China |
| EAN: | 9900003186613 |
| Gross Weight (kg): | 0.015 |
| Manufacturer ID: | OCTO28_ADAPTOR |
| Product ID: | ADA1779 |
| VPE: | SF28372 |
Manufacturer and safety information
PJRC.COM, LLC.
14723 SW Brooke CT
US OR 97140 Sherwood
https://www.pjrc.com
paul@pjrc.com
WEEE number: 89633988
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Ensure that the operating voltage (5V) is maintained to prevent damage.
- Do not expose to direct water or high humidity - electronics are not waterproof.
- Avoid short circuits through correct insulation and cabling.
- Take care when soldering to prevent overheating and damage to the LEDs.
- Do not point LEDs directly into the eyes as they can be very bright.
- Ensure that the power supply is sufficiently dimensioned for all installed LEDs.
- Only use cables specified for voltages and currents to prevent overheating or fires.
- In the event of damage to the module or defective LEDs, switch off the power supply immediately.
- Dispose of in accordance with local guidelines for electronic waste, as components may contain potentially harmful substances.
- Keep children away from these modules as they contain small parts and there is a risk of swallowing.
Reviews 0
Login