Description
Product information "Pico Decker (Quad Expander)"
Spoilt for choice between Pico add-ons? Combine an epic stack of features and connect up to four Pico Packs or Bases at once*, or use the four fully labelled male GPIO pins to easily connect other devices, jumper wires or circuits - very useful for prototyping. We've also included some small rubber feet to keep everything stable, four M2.5 mounting holes and some particularly quirky Routemaster bus-inspired artwork on the back.
A Raspberry Pi Pico is not included!
Features
- One landing area with labelled socket strips to connect to your Pico
- Four landing areas with labelled (mirrored) pin headers for connecting expansion boards
- 4x M2.5 mounting holes
- 4x rubber feet
- Compatible with Raspberry Pi Pico
- 99% assembled - all you need to do is stick the feet on!
- No soldering required
- Dimensions: approx. 148mm x 52mm x 13mm (including feet and header)
* If you use several Pico add-ons, you must check whether there are any conflicts with the data pins - we recommend using pinout.xyz or checking the shop page of the respective add-on!
* If you need to connect a pico base to the pico decker, you should do this with a jumper (male/female), to keep things manageable and to prevent everything being turned upside down!
Properties
| Zolltarifnummer: | 84718000 |
|---|---|
| Brand: | Pimoroni |
| Compatibility: | Raspberry Pi Pico |
| Country of Origin: | Great Britain |
| EAN: | 0769894017203 |
| Gross Weight (kg): | 0.043 |
| Manufacturer ID: | PIM555 |
| Product ID: | PIM555 |
Manufacturer
Pimoroni
Pimoroni – maker hardware with character from Sheffield
Pimoroni was founded in Sheffield, England in 2012 – in the same year as the Raspberry Pi, and initially with a single product: the colourful PiBow case. Since then the company has grown into one of the most creative hardware manufacturers in the maker scene, with a range that is designed, tested and largely manufactured in the UK.
What makes Pimoroni special is the mix of technical quality and playful design. HATs, breakouts and Pico boards are not only well engineered and documented, they also look good – and they come with Python libraries that make getting started easy. The Breakout Garden system lets you plug in sensors without soldering.
At BerryBase you will find a large selection of genuine Pimoroni products for Raspberry Pi, Pico and creative electronics projects.
Manufacturer and safety information
Pimoroni Ltd.
Unit 1, Parkway One Business Park
GB S9 4WN Sheffield
https://shop.pimoroni.com
mark@pimoroni.com
WEEE number: 20453810
Responsible person for the EU
See manufacturer information
Safety instructions
- Keep the product away from liquids, moisture and extreme heat.
- Only use the product in well-ventilated areas to avoid overheating.
- Ensure that no short circuits occur due to contact with conductive objects.
- Take care with the power supply; only use compatible power supply units.
- Be careful when handling sensitive contacts and components to avoid damage caused by electrostatic discharge (ESD).
- Only use the expansion board with suitable, compatible devices.
- Avoid modification or disassembly, as this may invalidate the warranty.
- Keep the product away from children, as small parts can be swallowed.
- Dispose of the device in an environmentally friendly manner and in accordance with local regulations for electronics.
- Never dispose of electronic components with household waste; use appropriate collection points.
Reviews 0
Login