Pokit Pro - Portable All-in-One Multimeter, Oscilloscope and Logger, Grey
Product number: POKIT-PRO-G
CHF 199.80
Currently not available
CHF 199.80
Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 10 piece · 2-5 Tage
Available · 15 piece · 2-5 Tage
Available · 42 piece · 2-5 Tage
Available · 5 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 57 piece · 2-5 Tage
Available · 5 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 23 piece · 2-5 Tage
Available · 83 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 80 piece · 2-5 Tage
Description
Product information "Pokit Pro - Portable All-in-One Multimeter, Oscilloscope and Logger, Grey"
Pokit Pro connects seamlessly with the smartphone app to measure a wide range of parameters. These include voltage, current, resistance, capacitance and temperature. It can also test continuity and diodes.
Pokit Pro builds on the success of Pokit Meter and offers many new features. It's ideal for electronics, automotive, home electronics and more.
Full-featured multimeter
The app combines all your favourite measurement modes into a single, seamless display. No reconfiguring test leads, no buttons. Perfect for use at home or on the go!
Connect up to four Pokit Pro devices to display different readings simultaneously, e.g. voltage and current.
- True RMS measurement
- Automatic measuring range
- Voltage: 1mV to 600V DC/AC (True RMS), ±1%.
- Current: 1uA to 10A max, ±1%
- Resistance: 100m to 1M Ohm, ±1%, 3M Ohm ±5%
- Capacitance: 1nF to 1000μF, ±2%
- Ambient temperature: 0°C to 60°C, ±1%
- NTC temperature sensor (sold separately): -40 to 120°C ±1% @25°C + 0.05%/°C
- Continuity tester and diode polarity tester
Digital multi-channel storage device Oscilloscope
An oscilloscope this small? Never before has there been so much power and freedom for your fingertips in electronic test equipment.
The Pokit Pro oscilloscope allows you to capture and display voltage and current waveforms in real time.
It also supports multi-channel functions. Connect up to four Pokit Pro devices simultaneously and display the signals at the same time.
- Sampling: 1Msample/sec, 12-bit
- Voltage: 1 mV to 600 V DC/AC (RMS), ±1 %.
- Current: 1uA to 10A AC(RMS)/DC max, ±1%'
- 1mS to 10s detection window
- Automatic trigger or adjustable rising/falling trigger level
Digital Fourier Analysis
Switch to DFT mode to view waveforms in the frequency domain. Use Pokit Pro as a spectrum analyser with real-time spectrum analysis and max/min hold functions.
- Sampling: 1Msample/sec, 12-bit
- Voltage: 1 mV to 600 V DC/AC (RMS), ±1 %.
- Current: 1uA to 10A AC(RMS)/DC max, ±1%
Long-term monitoring of parameters
Pokit Pro functions as a stand-alone data logger. It records temperature, voltage or current curves for up to six months without connecting to a phone. Just plug in your Pokit!
- 12-bit sampling
- Voltage: 1mV to 600V DC/AC (RMS), ±1%.
- Current: 1uA to 10A AC(RMS)/DC max, ±1%.
- Memory for 1 to 14000 points
- Up to 6 months recording
App functionality
- Find-my-Pokit function
Can't find your Pokit? With the Find-my-Pokit function, you can keep track of all your devices and rely on them.
This function locates your Pokit Pro based on the signal strength and makes the device flash to identify it among the other devices. The Pokit Pro can also beep to make it easier to locate. - Smartwatch integration
With Pokit's intuitive smartwatch app, you can check your measurements from the comfort of your wrist. - Scope measurement functions
Frequency, Period, PP, RMS, AVG, Duty
Get the most out of the Pokit Pro oscilloscope with its advanced functions: frequency, period, peak-peak, max and min measurements, average, duty cycle and RMS. - Improved multimeter functions
Say goodbye to recording measurements with pen and paper. With Pokit, you can record measurements with a tap on the screen and share them instantly on the internet. Don't have a free hand? No problem - just use the button on the Pokit Pro to activate the HOLD, LOG and torch functions. - Manual calibration
Pokit Pro comes pre-calibrated from the factory. There is also a manual calibration mode that allows you to check and change the calibrations to meet the requirements.
Smart design
- Colour options
Who says multimeters always have to be yellow? With Pokit Pro, life is colourful. - Cable storage
Tired of messy cables? Store your probe cable neatly in the Pokit Pro housing. - Channel illumination display
Determine the colour of your display to identify probes and multi-channel tracks. - Integrated torch
Illuminate your work area with the integrated torch.
Technical data
- Battery: Rechargeable (USB-C)
- Battery life (paired): 128kB, 2h/sample @ 6 months
- Connectivity: BLE v5.0, iOS: v9.0 or higher ,Android: v5.0 or higher
- Shape: Pen shape
- Dimensions: 170mm x 30mm x 23mm
- Operating temperature: -10˚C to 40˚C
- Line span (max. tip-to-tip): 800mm
- Length of the measuring tip: 13mm, 0.51"
- Weight: 78g
Scope of delivery
- Pokit Pro
- Attachable probe clips
- Cover for the probe tip
- USB-C cable
- Carrying case (hard case)
- Instruction manual
Properties
| Zolltarifnummer: | 90303100 |
|---|---|
| Brand: | Pokit |
| Country of Origin: | China |
| EAN: | 9357944090200 |
| Gross Weight (kg): | 0.266 |
| Manufacturer ID: | PRO-SLT |
| Product ID: | POKIT-PRO-G |
| VPE: | 1 / 10 |
Manufacturer
Pokit
PokitMeter: The world's smallest multimeter
Depending on your current project, it can be significant to check a wide variety of measured variables on a regular basis - and ideally at different locations as well. If you need a portable, pocket-sized multimeter for purposes like this, the PokitMeter is for you.
The compact and powerful 12-bit oscilloscope weighs just 80 grams and has a diameter of a handy 50 mm. It not only measures numerous parameters such as voltage (10mV to 60V DC, 42V AC [RMS], ±1%), resistance (1 to 1 million ohms, ±5%), current (1mA to 2A, ±1%) and temperature (1 to 60°C, ±1°C) with high precision, but also logs them. In addition, it is equipped with both a continuity tester and a diode test. The FFT mode even allows the multimeter to be turned into a spectrum analyzer. With all its features, the PokitMeter can consequently be of great use as a portable oscilloscope in many different areas, for example in home automation or low-voltage electronics.
Convenient: The PokitMeter can also be connected to your mobile device via Bluetooth. This makes it ideal as an oscilloscope for your smartphone or tablet. Thanks to the free PokitMeter app for iOS and Android, you can easily document the measurement series on your mobile device, voltage and current curves are displayed in detail and easy to understand on your mobile display. With the Pokit voltmeter, your smartphone becomes the ultimate tool! Best of all, it's surprisingly easy and intuitive to use. Waveforms are easy to pan and zoom; settings and modes can be easily changed on your versatile oscilloscope using the touch function. For example, you can adjust the acquisition voltage and time base and activate a trigger mode. Even without a connection to a mobile device, the collected measurement data is recorded over a period of up to six months.
At Berrybase, you can get the PokitMeter in either classy black or chic transparent - the choice is yours! You can also find a fuse set with five replacement fuses including fuse covers in our online store - so that the PokitMeter remains a reliable portable oscilloscope for as long as possible.
Manufacturer and safety information
Pokit Innovations Pty Ltd
56 Delhi Road
AU NSW 2113 Sydney
https://www.pokitmeter.com
support@pokitmeter.com
WEEE number: 52375143
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Read and follow the operating instructions carefully before use.
- Never use the multimeter on live cables that exceed the specified input voltage of the device.
- Only use insulated test leads and measuring accessories with a suitable voltage class.
- Protect the device from moisture, extreme temperatures and shocks.
- Replace defective or damaged test probes and cables immediately.
- Switch off the multimeter before changing the battery or carrying out maintenance work.
- Only insert batteries with the correct polarity, remove leaking batteries immediately.
- Dispose of in accordance with local environmental regulations, especially for electronic components and batteries.
- Do not dispose of the multimeter in open flames as there is a risk of explosion.
- Keep the device out of the reach of children.
Reviews 0
Login
Customers also viewed
Available · 4 piece · 2-5 Tage
Available · 3 piece · 2-5 Tage