Description
Product information "Pololu 156:1 Metal geared motor 20Dx44L mm 6V"
Characteristics at 6 V: 93 RPM and 170 mA without load, 110 oz-in (7.9 kg-cm) and 2.9 A at standstill.
Note: The torque limit of the gearbox is 70 oz-in (5 kg-cm); see detailed description for important product limitations.
Technical data:
- Size: 20D × 44L mm
- Weight: 45 g
- Shaft diameter: 4 mm
- Gear ratio: 156.25:1
- No-load speed @ 6V: 93 rpm
- No-load current at 6 V: 170 mA
- Standstill current at 6 V: 2.9 A
- Standstill torque at 6 V: 110 oz-in
- Extended motor shaft? No
- Motor type: 2.9 A stall current at 6 V
https://www.pololu.com/product/3456
Properties
| Zolltarifnummer: | 85011040 |
|---|---|
| Brand: | Pololu |
| Country of Origin: | China |
| EAN: | 4060137103278 |
| Gross Weight (kg): | 0.048 |
| Manufacturer ID: | 3456 |
| Product ID: | POL3456 |
Manufacturer
Pololu
Pololu – robotics and electronics from Las Vegas
Pololu Robotics and Electronics was founded in 2000 and develops and manufactures its products in Las Vegas, Nevada. What began as a small company for robotics parts is today a fixture among makers, students and engineers worldwide.
Pololu is best known for its compact voltage regulators and motor drivers, which are found in countless projects – small, efficient and exceptionally well documented. Add to that sensors, microcontroller boards, mechanical parts and complete robot platforms such as the 3pi or Zumo. Every product page offers data sheets, sample code and honest notes on the product's limits.
At BerryBase you will find genuine Pololu components for robotics, power supply and drive technology.
Manufacturer and safety information
Pololu Corporation
920 Pilot Rd.
US 89119 Las Vegas, Nevada
https://www.pololu.com/
support@pololu.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before use, ensure that the component is suitable for the intended application.
- Before installation, switch off the power supply to the device and secure it against being switched on again.
- Do not expose to mechanical or thermal loads outside the specifications.
- Avoid short circuits, overheating and overloading to prevent damage and safety risks.
- Do not use in potentially explosive atmospheres unless expressly certified for this purpose.
- Take care with moving parts to avoid injuries caused by mechanical impact.
- Do not make any modifications to the product, as this may impair its safety and function.
- In the event of damage or malfunctions, take the component out of operation immediately and have it checked by a specialist.
- After use, dispose of as electronic scrap or hazardous waste in accordance with local regulations.
- Do not dispose of with household waste; use environmentally friendly recycling options.
Reviews 0
Login