seeed Grove - Electricity sensor (TA12-200)
Product number: SE-101020027
CHF 7.10
Available · 1 piece · 2-5 Tage
CHF 7.10
Customers also bought
Available · 19 piece · 2-5 Tage
Available · 81 piece · 2-5 Tage
Available · 30 piece · 2-5 Tage
Available · 6 piece · 2-5 Tage
Available · 13 piece · 2-5 Tage
Description
Product information "seeed Grove - Electricity sensor (TA12-200)"
The Grove electricity sensor module is based on a TA12-200 current transformer that converts large alternating currents into a small output signal. The module enables the measurement of alternating currents up to a maximum of 5 amperes. It is suitable for applications such as current monitoring or device status analysis and can be easily integrated into existing systems thanks to the Grove interface.
The TA12-200 is a current transformer that is used for the galvanically isolated measurement of large alternating currents. The small alternating voltage generated can be analysed by microcontrollers. This functional principle allows it to be used in areas where direct measurement of the current flow through a system is not possible or is safety-critical. The sensor outputs an analogue signal that is proportional to the current in the conductor to be monitored.
The module is used for current measurement in AC circuits with currents of up to 5 A. It can be used to monitor the operating status of devices, e.g. by recording the current consumption. The sensor works without contact as it is based on induction. This property makes it possible to measure alternating current without disconnecting the conductor. Areas of application include energy monitoring in DIY, Arduino or Raspberry Pi projects as well as industrial applications.
The product measures alternating current without contact using a current transformer. It is placed near a live conductor, inductively measures the current and passes a corresponding output voltage to microcontrollers or other analogue inputs. The sensor is small, Grove-compatible and can be easily integrated into existing systems. The maximum current load is 5 A.
Features at a glance
- Based on TA12-200 current transformer
- Measuring range up to 5 A alternating current
- Analogue output proportional to the measured current
- Compact design for easy integration
- Grove connection for plug-and-play use
- Arduino
- Raspberry Pi
- Grove-compatible platforms
- Maximum input current: 5 A
- Measuring principle: inductive current transformer (TA12-200)
- Interface: analogue, Grove-compatible
- Design: compact
- No battery included
- 1x Grove electricity sensor (TA12-200)
- 1x Grove cable
Properties
| Zolltarifnummer: | 90230010 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| EAN: | 841454108474 |
| Gross Weight (kg): | 0.016 |
| Manufacturer ID: | 101020027 |
| Product ID: | SE-101020027 |
Manufacturer and safety information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
seeed_emea@seeed.cc
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Always install and operate sensors and modules in accordance with the manufacturer's instructions.
- Always switch off the power supply before installation or maintenance.
- Avoid direct contact with electrical connections to prevent electric shocks.
- Only use in dry and suitable environments to avoid short circuits or malfunctions.
- Check the device for damage or defects before use.
- Do not operate above the specified voltage and current.
- In the event of malfunctions, disconnect the appliance from the power supply immediately.
- Dispose of in accordance with local electrical and electronic waste regulations.
- Do not dispose of in normal household waste as it may contain hazardous substances.
- Keep children away from the product to prevent misuse or injury.
Reviews 0
Login