seeed Grove ORP Sensor Kit Pro, ORP probe, water quality measurement, -2000 to +2000 mV, +/-15mV, 5V
Product number: SE-110020370
CHF 77.15
Available · 2 piece · 2-5 Tage
CHF 77.15
Description
Product information "seeed Grove ORP Sensor Kit Pro, ORP probe, water quality measurement, -2000 to +2000 mV, +/-15mV, 5V"
The Grove - ORP Sensor Kit (HR-O) aims to measure the cleanliness of water and its ability to break down impurities. It uses a 5 metre IP68 ORP probe and offers a measurement range of -2000 mV to 2000 mV, operating at temperatures from 0-80°C. This sensor is part of the easy-to-use Grove ecosystem and supports Arduino programming. The environmentally friendly and RoHS-certified sensor measures the activity of oxidising agents and reducing agents in aqueous solutions and evaluates the self-purification power of lakes or rivers as well as the ability to break down waste products. Different oxidation-reduction processes have different ORP values (mV), with aerobic conditions having higher and anaerobic conditions lower ORP values.
Features at a glance
- Grove ORP Sensor Upgrade: Equipped with a 5 metre IP68 ORP probe, measuring range from -2000 mV to 2000 mV, operating temperature from 0-80°C, easy to use in the Grove ecosystem.
- Improved measurement performance: Maintains a measurement accuracy of ±15mV at 0-60°C.
- Working voltage: Supports both 3.3V and 5V operating conditions.
- Interchangeable sensor nodes: Supports BNC-linked sensor probes.
- RoHS certification: Environmentally friendly, guaranteed detection.
- Measuring range: -2000mV to +2000mV
- Resolution: 1 mV
- Accuracy: ±15mV
- Aeropotential point (pH): 7.00±0.30
- Slope factor: >96%
- Operating voltage: 3.3V/5V
- Working temperature: 0-80°C
- Reference system: Liquid interface
- Housing material: PPS
- Diaphragm resistance: <500 MΩ
- Cable length: 5 metres
- Mounting method: Suspension
- Degree of protection: IP68
- Electrical connection: BNC
- Monitoring and control of oxidation-reduction reactions
- Detection of disinfected water
- Detection of healthy water
- Determination of the types of microbes
- Detection of anaerobic microbial activity
- Wastewater treatment
- Aquaculture
- Monitoring of industrial wastewater disposal systems
- 1x driver board
- 1x ORP sensor probe
- 1x Grove cable
Wiki: Grove ORP Sensor Pro
Properties
| Zolltarifnummer: | 90261029 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| Gross Weight (kg): | 0.006 |
| Manufacturer ID: | 110020370 |
| Product ID: | SE-110020370 |
Manufacturer and safety information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
seeed_emea@seeed.cc
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Only operate the sensor with the specified operating voltage to avoid damage and danger.
- Avoid contact with water unless the product is expressly labelled as waterproof or watertight.
- Protect the sensor from mechanical impacts such as knocks or bumps.
- Do not open, modify or disassemble without authorisation, as this may impair the function and cause hazards.
- Connection should only be carried out by qualified personnel to prevent incorrect wiring.
- Ensure that the sensor is suitable for the measured pressure ranges to avoid overloading.
- Remove the sensor from the system if it is defective to prevent consequential damage.
- Disconnect the electrical connections before disposal and treat the device as electronic waste in accordance with the applicable disposal regulations.
- Properly recycle packaging materials to minimise environmental impact.
- Do not dispose of improperly, e.g. in household waste.
Reviews 0
Login