seeed Grove - UART WiFi v2 (ESP8285)
Product number: SE-113020011
CHF 9.70
Currently not available
CHF 9.70
Customers also bought
Available · 35 piece · 2-5 days
Available · 2 piece · 2-5 days
Available · 35 piece · 2-5 days
Available · 5 piece · 2-5 days
Available · 17 piece · 2-5 days
Content: 5 Stück (CHF 0.80 / 1 Stück)
Available · 34 piece · 2-5 days
.png?ts=1730377780){kind=logo}
Available · 44 piece · 2-5 days
Available · 32 piece · 2-5 days
Description
Product information "seeed Grove - UART WiFi v2 (ESP8285)"
Grove - UART WiFi V2.0 (ESP8285) is a serial transceiver module with an integrated ESP8285 SoC that has TCP/IP protocol stack firmware. This enables a microcontroller to access WLAN networks using simple text commands. The module supports 802.11 b/g/n in the 2.4 GHz band with a data rate of up to 72.2 Mbps and can be used as an access point (AP) or station. It offers WPA/WPA2-PSK and WPS security protocols as well as a configurable MAC/IP address system.
The module is based on the ESP8285, an improved version of the ESP8266, and contains five energy modes (OFF, DEEP_SLEEP, SLEEP, WAKEUP, ON), high cache performance for system optimisation and low power consumption in standby mode.
The Grove-compatible module is pluggable and can be used immediately thanks to pre-installed AT command firmware. It is suitable for microcontroller developments in the field of home automation, wearables, sensor networks, network monitoring and other IoT applications.
The module can be used as a stand-alone application or as a WLAN adapter in host microcontroller designs via SPI/SDIO or I2C/UART interfaces. The fast response time (wake-to-transmit < 2 ms) allows real-time applications with low latency.
Features at a glance
- Integrated ESP8285 WiFi SoC with support for 802.11 b/g/n
- Plug-and-play compatible with Grove system
- Five energy modes, including DEEP_SLEEP
- Security protocols: WPA/WPA2, WPS
- Supports SPI, UART, SDIO interfaces
- Wake-to-transmit within 2 ms
- Arduino
- Seeeduino
- Microcontrollers with UART, SPI or SDIO
- Chip: ESP8285 ESP-07 SoC
- Input voltage: 3 V / 5 V
- Dimensions: 40 mm × 20 mm × 7 mm
- Baud rate: 115200
- Interfaces: UART, SPI, SDIO 1.1/2.0
- Firmware: esp_iot_sdk_v1.1.0 (AT commands)
- WLAN frequency: 2.4-2.4835 GHz
- WLAN modes: Access point and station
- Output power: +19.5 dBm in 802.11b mode
- Standby consumption: < 1.0 mW (DTIM=3)
- Leakage current in power-down mode: < 10 µA
- Supported protocols: TCP/IP, WEP, WPA/WPA2, TKIP, AES, WAPI
- No battery included
- 1x Grove - UART WiFi V2 (ESP8285)
- 1x Grove cable
Properties
| Zolltarifnummer: | 84733080 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| EAN: | 4060137090974 |
| Gross Weight (kg): | 0.010 |
| Manufacturer ID: | 113020011 |
| Product ID: | SE-113020011 |
Manufacturer and safety information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
seeed_emea@seeed.cc
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Do not use in potentially explosive atmospheres.
- Keep away from water, moisture and high temperatures.
- Avoid direct sunlight to prevent overheating.
- Take care when handling electrical connections, avoid short circuits.
- Maintain safe distances from other electronic devices to minimise interference.
- Never open, convert or modify the device without authorisation.
- Only use compatible power supply units or voltage sources.
- Recycle the product in accordance with local regulations for electronic waste.
- Dispose of batteries/rechargeable batteries, if included, separately and in an environmentally friendly manner.
- Never dispose of electronic waste in household waste.
Reviews 0
Login