CHF 159.40
Available · 5 piece · 2-5 Tage
CHF 159.40
Description
Product information "SparkFun LTE GNSS Breakout, SARA-R5"
The UBX-R5 chipset supports many different forms of data communication, from full TCP/IP sockets and packet switched data to HTTP get/put/post, FTP (the SARA has a built-in file system), ping and good old SMS! The built-in u?blox M8 GNSS receiver ensures accurate and reliable positioning and has a separate GNSS antenna interface for an external antenna. Both the GNSS antenna and the LTE connections are made via a pair of SMA connectors.
This breakout leads almost all functional pins of the SARA-R510M8S module to user interfaces (USB or vias), allowing you to fully utilise all the features of this impressive LTE/GNSS module. The SARA-R5's UART interface can be configured in one of five variants and offers connectivity via one or two UARTs. A separate USB port allows access to the SARA's trace log for diagnostic purposes. This breakout provides access to all three interfaces (UART1, UART2 and SARA Diag) via three separate USB-C ports. All eight serial 3.3 V signals are available on a breakout header with 0.1" pitch. Separate 0.1" pitch headers provide the I2C bus of the SARA, power pins and GPIO pins for various functionalities.
Contains:
- 1x SparkFun LTE GNSS Breakout - SARA-R5
- 1x Hologram eUICC SIM card
- u-blox SARA-R510M8S module offers Secure Cloud LTE-M and NB-IoT data communication for multiregional use
- Please check if your service provider offers LTE-M / NB-IoT coverage for your area before purchasing
- Integrated u-blox M8 GNSS receiver for accurate positioning data
- Nano SIM connector
- Separable, robust SMA connectors for LTE and GNSS antennas
- Switchable 3.3 V power supply for an active GNSS antenna
- USB-C connectivity
- LED indicators for:
- Power supply (VIN and 3.3V)
- SARA-R5 switched on
- Network indicator
- GNSS time pulse (1PPS)
- 3.3V plated through-hole (PTH) Pins for:
- SARA on
- Network display
- UART1
- GNSS time pulse (1PPS)
- I2C bus
LTEGNSS Breakout - SARA-R5 Documentation
- Introduction to the LTE GNSS Breakout - SARA-R5 manual
- Circuit diagram
- Eagle files
- Board dimensions
- Connection instructions
- SparkFun u-blox SARA-R5 Arduino library
- GitHub Hardware Repository
Properties
| Zolltarifnummer: | 85176900 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 845156011636 |
| Gross Weight (kg): | 0.030 |
| Manufacturer ID: | GPS-18031 |
| Product ID: | GPS-18031 |
Video 1
Manufacturer and safety information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Before commissioning the GPS/GNSS module, check all connections carefully to avoid short circuits.
- Protect the device from moisture, extreme temperatures and other environmental influences.
- Only use with the specified operating voltage and the specified components.
- During installation, ensure that the antenna has a clear view of the sky to guarantee optimum signal quality.
- Handle components with care to avoid damage caused by electrostatic discharge (ESD).
- Do not use in the vicinity of strong magnetic or electromagnetic fields.
- At the end of its service life, dispose of it in an environmentally friendly manner and in accordance with local regulations.
- Do not dispose of electronic components with household waste, but take them to an appropriate collection point.
Reviews 3
Login
3 reviews
24 June 2023 07:30
Nur LTE-M1
Guten Tag
die Beschreibung suggeriert, dass LTE-M1 und NB-IoT unterstuetzt werden. Leider kann die verbaute Hardware Version "00B" des u-Blox Moduls aber nur LTE-M1 (und kein NB-IoT). Erst Hardware Version "01B" unterstuetzt beides.
Im Sparkfun Shop findet sich ein Hinweis darauf. Zitat von hier: https://www.sparkfun.com/products/18031
"Note - Please read before purchasing!: The SparkFun LTE GNSS Breakout - SARA-R5 uses the "00B" product version of the SARA-R5 module (specifically the SARA-R510M8S-00B-00). LTE NB-IoT Radio Access Technology, and the LTE FDD bands: 66, 71, 85 are not supported by this version. Refer to the SARA-R5 datasheet for more information."
Nach Ruecksprache mit dem u-Blox Service wurde mir bestaetigt, dass erst die Hardware Version "01B" NB-IoT unterstuetzt.
Ich muss sagen; ich bin ziemlich enttaeuscht.
Danke und Gruss
Felix
23 June 2023 00:16
Nur LTE-M1
Guten Tag
die Beschreibung suggeriert, dass LTE-M1 und NB-IoT unterstuetzt werden. Leider kann die verbaute Hardware Version "00B" des u-Blox Moduls aber nur LTE-M1 (und kein NB-IoT). Erst Hardware Version "01B" unterstuetzt beides.
Im Sparkfun Shop findet sich ein Hinweis darauf. Zitat von hier: https://www.sparkfun.com/products/18031
"Note - Please read before purchasing!: The SparkFun LTE GNSS Breakout - SARA-R5 uses the "00B" product version of the SARA-R5 module (specifically the SARA-R510M8S-00B-00). LTE NB-IoT Radio Access Technology, and the LTE FDD bands: 66, 71, 85 are not supported by this version. Refer to the SARA-R5 datasheet for more information."
Nach Ruecksprache mit dem u-Blox Service wurde mir bestaetigt, dass erst die Hardware Version "01B" NB-IoT unterstuetzt.
Ich muss sagen; ich bin ziemlich enttaeuscht.
Danke und Gruss
Felix
16 June 2023 21:52
Nur LTE-M1
Guten Tag
die Beschreibung suggeriert, dass LTE-M1 und NB-IoT unterstuetzt werden. Leider kann die verbaute Hardware Version "00B" des u-Blox Moduls aber nur LTE-M1 (und kein NB-IoT). Erst Hardware Version "01B" unterstuetzt beides.
Im Sparkfun Shop findet sich ein Hinweis darauf. Zitat von hier: https://www.sparkfun.com/products/18031
"Note - Please read before purchasing!: The SparkFun LTE GNSS Breakout - SARA-R5 uses the "00B" product version of the SARA-R5 module (specifically the SARA-R510M8S-00B-00). LTE NB-IoT Radio Access Technology, and the LTE FDD bands: 66, 71, 85 are not supported by this version. Refer to the SARA-R5 datasheet for more information."
Nach Ruecksprache mit dem u-Blox Service wurde mir bestaetigt, dass erst die Hardware Version "01B" NB-IoT unterstuetzt.
Ich muss sagen; ich bin ziemlich enttaeuscht.
Danke und Gruss
Felix