Customers also bought
Available · 100+ piece · 2-5 days
Available · 92 piece · 2-5 days
Available · 100+ piece · 2-5 days
Available · 63 piece · 2-5 days
Available · 46 piece · 2-5 days
Available · 26 piece · 2-5 days
Available · 1 piece · 2-5 days
Available · 9 piece · 2-5 days
Available · 100+ piece · 2-5 days
.png?ts=1730377780){kind=logo}
Description
Product information "SparkFun OpenLog, without header"
The SparkFun OpenLog uses an ATmega328 running at 16MHz thanks to the onboard resonator. The OpenLog draws about 2-3mA in idle mode (no recording). During a full recording OpenLog can draw 10 to 20mA, depending on the microSD card used.
All data recorded by the OpenLog is stored on the microSD card. Any microSD card with 512MB to 32GB should work. OpenLog supports both FAT16 and FAT32 SD formats.
For even better performance, the OpenLog Artemis is the right tool, with a recording speed of up to 500000bps.
Features:
- VCC input: 3.3V-12V (recommended 3.3V-5V)
- Log to low-cost microSD FAT16/32 cards up to 32GB
- Simple command interface
- Configurable baud rates (up to 115200bps)
- Pre-programmed ATmega328 and bootloader
- Four SPI pogo pins
- Two LEDs indicate write status
- 2mA in idle mode, 6mA at maximum recording rate
Properties
| Zolltarifnummer: | 85423911 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 4060137028021 |
| Gross Weight (kg): | 0.001 |
| Manufacturer ID: | DEV-13712 |
| Product ID: | DEV-13712 |
Manufacturer and safety information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
support@sparkfun.com
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Do not bring into direct contact with water or moisture, as the electronics may be damaged.
- Protect against static discharge, e.g. by earthing the work surface.
- Keep away from extreme temperatures and direct sunlight.
- Only install or remove connections and modules using suitable tools.
- Do not use force to insert the module into a connection or socket.
- Before installation, ensure that the power supply is switched off.
- Only operate with the voltage specifications specified by the manufacturer.
- Do not use defective or damaged devices and dispose of them properly.
- Do not dispose of electronic components in household waste; dispose of them in accordance with local regulations for electronic waste.
- Keep components out of the reach of children.
- Check the data logger regularly for software updates to avoid security gaps.
- Store in a dry, cool environment for longer periods.
Reviews 0
Login
