Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 47 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 61 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 19 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 82 piece · 2-5 Tage
Available · 83 piece · 2-5 Tage
Available · 72 piece · 2-5 Tage
Available · 8 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 99 piece · 2-5 Tage
Description
Product information "SX1262 LoRa HAT for Raspberry Pi, 868 MHz frequency band"
This LoRa HAT, suitable for the Raspberry Pi, is based on the SX1262 and covers the 868MHz frequency band. It enables data transmission up to 5 km via the serial interface.
By using the new generation of LoRa spread spectrum modulation technology, the communication range of the module is up to 5 km long, also supports automatic repetition to transmit longer. Other functions include wake on radio, wireless configuration, carrier detection, communication key and so on.
Compared with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication range, higher rate, lower consumption, better security and anti-interference. It is suitable for various applications such as industrial control, smart home, data acquisition, etc.
Features
- Standard Raspberry Pi 40 pin GPIO expansion header, supports Raspberry Pi series boards
- Onboard CP2102 USB - UART converter, for serial debugging
- Brings the UART control interface for connecting host boards such as Arduino/STM32.
- 4x LED indicators, easy to check module status
- LoRa spread spectrum modulation technology, up to 84 available signal channels, longer communication range, more robust against interference
- Automatic multi-stage repetition, suitable for ultra-long range communication, enables multi-network on the same region.
- Low power consumption features such as deep sleep and wake on radio, ideal for battery powered applications.
- Customisable communication key that cannot be retrieved, greatly improves the security of user data.
- Supports LBT, monitors the noise of the signal channel before transmission, greatly improves the success rate under extreme conditions.
- Supports RSSI signal intensity, which indicates the tuning of the network to judge the signal quality.
- Supports wireless parameter configuration by sending wireless command/data packet, remote configuration or module parameter retrieval.
- Supports fixed-point transmission, broadcast, signal channel monitoring
- Detailed development resources and manual (examples for Raspberry Pi/STM32) in the Waveshare Wiki
Waveshare specifications
- Frequency band: 850.125 - 930.125 MHz
- Antenna: 868 MHz (2dBi)
- Radio rate: 0.3kbps ~ 62.5kbps (programmable)
- Transmit power: 22.0dBm (10/13/17/22dBm programmable)
- Receive sensitivity: -147dBm (radio rate 2.4kbps)
- Power consumption:
- Transmitter current: 133mA (transient consumption)
- Receive current: 11mA
- Quiescent current: 2uA (LoRa module software switch-off)
- Communication interface: UART (TTL level)
- Baud rate: 1200bps ~ 115200bps (9600bps by default)
- Packet length: 240 bytes (32/64/128/240 bytes programmable)
- Cache: 1000 bytes
- Experimental range: 5km (condition: cloudless and windless, height 2.5m, antenna gain 5dBi, radio rate 2.4kbps)
- Power supply: 5V
- Logic level: 3.3V/5V/5V
- Operating temperature: -40~85℃
Scope of delivery
- SX1262 868M LoRa HAT x1
- Micro USB cable x1
- 868 MHz antenna x1
Development Resources
Wiki: https://www.waveshare.com/wiki/SX1262_868M_LoRa_HAT
Properties
| Zolltarifnummer: | 85176200 |
|---|---|
| Brand: | Waveshare |
| Compatibility: | Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi 3B, Raspberry Pi 3A+, Raspberry Pi Zero W, Raspberry Pi Zero |
| Country of Origin: | China |
| EAN: | 614961955325 |
| Gross Weight (kg): | 0.069 |
| Manufacturer ID: | SX1262 868M LoRa HAT |
| Product ID: | RPI-868LORA |
Manufacturer
Waveshare
Waveshare: High quality modules for your Raspberry Pi
Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.
Waveshare provides an optimal view
You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.
For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.
If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.
Compact and of brilliant quality: The Waveshare 7 inch Display
The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.
At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.
Waveshare Game HAT: Turning your Raspberry Pi into a game console
One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.
If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.
Practical accessories for every purpose
By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.
Manufacturer and safety information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com
WEEE number: 72769965
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Only use the product in accordance with the manufacturer's instructions.
- Avoid direct contact with electrical connections, especially during operation.
- Only connect compatible devices or components to avoid damage.
- Keep the product away from water, moisture and extreme heat.
- Ensure sufficient ventilation to prevent overheating.
- Always disconnect the appliance from the power supply before making any changes or installations.
- Use community-approved and trusted code software, especially for wireless applications.
- Observe local regulations and frequency specifications when using wireless modules.
- Dispose of the product in accordance with the applicable environmental regulations for electronic devices.
- Do not dispose of electronic components in household waste, but dispose of them at recycling centres.
- Remove rechargeable batteries or batteries and dispose of them in accordance with the disposal guidelines.
Reviews 0
Login
Ähnliche Artikel
Available · 83 piece · 2-5 Tage
Customers also viewed
Available · 24 piece · 2-5 Tage
Available · 83 piece · 2-5 Tage
Available · 13 piece · 2-5 Tage
Available · 8 piece · 2-5 Tage
Available · 19 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 26 piece · 2-5 Tage
Available · 1 piece · 2-5 Tage
Available · 45 piece · 2-5 Tage