Waveshare 2.13" e-paper display for Raspberry Pi Zero: 5-point touch, 250×122 pixels, ABS housing
Product number: WS-20716
Customers also bought
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 58 piece · 2-5 Tage
Available · 83 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 72 piece · 2-5 Tage
Available · 22 piece · 2-5 Tage
Available · 4 piece · 2-5 Tage
Available · 7 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 43 piece · 2-5 Tage
Available · 33 piece · 2-5 Tage
Available · 100 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Description
Product information "Waveshare 2.13" e-paper display for Raspberry Pi Zero: 5-point touch, 250×122 pixels, ABS housing"
This 2.13-inch touch e-paper e-ink display is specially designed for the Raspberry Pi Zero / Zero W. It offers low power consumption and a wide viewing angle with a paper-like effect. It offers low power consumption, a wide viewing angle and a paper-like effect. Its integration with Raspberry Pi Zero modules and various sensors creates a synergistic connection that extends the functionality and usability of technology projects. With low power requirements and easy handling thanks to provided development resources and a robust housing, the display is a versatile choice for developers and hobbyists who want to turn their creativity into practical and innovative solutions.
Features at a glance
- 2.13 inch capacitive touch e-paper display, 5-point touch, 250×122 pixels
- Supports wake-up by user-defined gesture
- No backlight, displays last content for a long time even when switched off
- Ultra-low power consumption, power mainly only required for updates
- Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi Zero / Zero W
- Development resources and manual available (examples for Raspberry Pi)
- Operating voltage: 3.3V
- Grey scale: 2
- Interface: 3-wire SPI, 4-wire SPI
- Partial update time: 0.3s
- Dimensions: 69.15 x 38.90 mm
- Full update time: 2s
- Display size: 48.55 x 23.70 mm
- Update power: 26.4mW (typ.)
- Dot size: 0.194 x 0.194 mm
- Standby current: <0.01uA (almost none)
- Resolution: 250×122 pixels
- Viewing angle: >170°
- Display colour: black, white
- Touch points: 5 (max)
- 1x 2.13 inch Touch-e-Paper-HAT
- 1x ABS housing
- 1x screwdriver
- 1x heat conducting tape
- 4x rubber feet
- 2x screws
Properties
| Zolltarifnummer: | 85437009 |
|---|---|
| Brand: | Waveshare |
| Compatibility: | Raspberry Pi 5 |
| Country of Origin: | China |
| EAN: | 4060137073694 |
| Gross Weight (kg): | 0.062 |
| Manufacturer ID: | 2.13inch Touch e-Paper HAT (with case) |
| Product ID: | WS-20716 |
Video 1
Manufacturer
Waveshare
Waveshare: High quality modules for your Raspberry Pi
Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.
Waveshare provides an optimal view
You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.
For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.
If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.
Compact and of brilliant quality: The Waveshare 7 inch Display
The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.
At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.
Waveshare Game HAT: Turning your Raspberry Pi into a game console
One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.
If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.
Practical accessories for every purpose
By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.
Manufacturer and safety information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com
WEEE number: 72769965
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Avoid direct contact with water, moisture and extreme temperatures.
- Protect the ePaper display from mechanical stress, impact and scratches.
- Avoid static discharges that could permanently damage the module.
- Only store and operate the product within the specified temperature ranges.
- Ensure that the ePaper Display is connected correctly to avoid damage due to incorrect polarity or overvoltage.
- Dispose of the ePaper Display in accordance with the regional regulations for electronic waste.
- Keep the module away from any corrosive chemicals or solvents.
- Do not disassemble or modify the product improperly.
- Keep out of the reach of small children, as small parts can be swallowed.
- Observe the recommended handling of flexible connections to avoid damage.
Reviews 0
Login
Ähnliche Artikel
Available · 8 piece · 2-5 Tage
Zubehör
Available · 11 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Customers also viewed
Available · 44 piece · 2-5 Tage
Available · 36 piece · 2-5 Tage