Skip to main content Skip to search Skip to main navigation
Lightning-fast shipping until 14:00 Lightning shipping by 14:00
Free shipping from CHF 200
Support B2B Shop Education

Frequently Bought Together

23 items
Breadboard with 830 contacts Breadboard with 830 contacts

Average rating of 4.61 out of 5 stars

BerryBase
BB-830P
Breadboard with 830 contacts

CHF 1.65
Available · 100+ piece · 2-5 days
Breadboard with 400 contacts Breadboard with 400 contacts

Average rating of 4.6 out of 5 stars

BerryBase
BB-400P
Breadboard with 400 contacts

CHF 1.40
Available · 100+ piece · 2-5 days
New
Seeed Studio XIAO ESP32-C3, Winziges IoT Dev Board, WLAN, BT5.0, Akku-Lademanagement, Antenne, 3,3V Seeed Studio XIAO ESP32-C3, Winziges IoT Dev Board, WLAN, BT5.0, Akku-Lademanagement, Antenne, 3,3V

Average rating of 4.33 out of 5 stars

seeed
SE-XIAO-C3
Seeed Studio XIAO ESP32-C3, Winziges IoT Dev Board, WLAN, BT5.0, Akku-Lademanagement, Antenne, 3,3V

From CHF 7.00
Available · 100+ piece · 2-5 days
40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm 40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

Average rating of 4.25 out of 5 stars

BerryBase
DUPK-SET-20
40pin Jumper / Dupont cable set, 1x F-F / M-M / F-M each, 20cm

CHF 4.90
Available · 100+ piece · 2-5 days
40pin Jumper / Dupont cable Male Male separable

Average rating of 4.61 out of 5 stars

BerryBase
DUPONT-MM
40pin Jumper / Dupont cable Male Male separable

From CHF 1.60
Available · 100+ piece · 2-5 days
Male connector, 1x 40-pin, RM 2.54, straight Male connector, 1x 40-pin, RM 2.54, straight

Average rating of 5 out of 5 stars

BerryBase
PINH-1X40P
Male connector, 1x 40-pin, RM 2.54, straight

CHF 0.60
Available · 85 piece · 2-5 days
1.54" 200×200 ePaper display module with SPI interface, three-colour (red, black, white) 1.54" 200×200 ePaper display module with SPI interface, three-colour (red, black, white)
Waveshare
3C-EINKM-154
1.54" 200×200 ePaper display module with SPI interface, three-colour (red, black, white)

CHF 11.70
Available · 74 piece · 2-5 days
SanDisk Ultra microSDHC A1 120MB/s Class 10 memory card + adapter 32GB SanDisk Ultra microSDHC A1 120MB/s Class 10 memory card + adapter 32GB

Average rating of 4.85 out of 5 stars

SanDisk
619659184155
SanDisk Ultra microSDHC A1 120MB/s Class 10 memory card + adapter 32GB

CHF 16.25
Available · 100+ piece · 2-5 days
40pin Jumper / Dupont cable Male Female separable

Average rating of 4.77 out of 5 stars

BerryBase
DUPONT-FM
40pin Jumper / Dupont cable Male Female separable

From CHF 1.60
Available · 100+ piece · 2-5 days
Stranded copper wire insulated, 1x0.14mm, 10m Stranded copper wire insulated, 1x0.14mm, 10m

Average rating of 4.86 out of 5 stars

goobay
55044
Stranded copper wire insulated, 1x0.14mm, 10m

Content: 10 Meter (CHF 0.11 / 1 Meter)

CHF 1.10
Available · 100+ piece · 2-5 days
40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm 40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm

Average rating of 4.33 out of 5 stars

BerryBase
DUPK-SET-10
40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm

CHF 4.40
Available · 100+ piece · 2-5 days
Mini step-down converter adjustable 4.75-23V -> 1-17V / 3A Mini step-down converter adjustable 4.75-23V -> 1-17V / 3A

Average rating of 5 out of 5 stars

BerryBase
REGA3A
Mini step-down converter adjustable 4.75-23V -> 1-17V / 3A

CHF 1.20
Available · 100+ piece · 2-5 days
official Raspberry Pi Micro USB power supply 5.1V / 2.5A, EU, white official Raspberry Pi Micro USB power supply 5.1V / 2.5A, EU, white

Average rating of 5 out of 5 stars

Raspberry Pi Foundation
RPIMNT25W
official Raspberry Pi Micro USB power supply 5.1V / 2.5A, EU, white

CHF 7.90
Available · 100+ piece · 2-5 days
Jumper cable kit / set with 65 cables in 4 lengths for breadboards Jumper cable kit / set with 65 cables in 4 lengths for breadboards

Average rating of 5 out of 5 stars

BerryBase
JUMPER-WIRE-65
Jumper cable kit / set with 65 cables in 4 lengths for breadboards

CHF 1.40
Available · 100+ piece · 2-5 days
Raspberry Pi 27W USB-C Power Supply, power supply unit, black Raspberry Pi 27W USB-C Power Supply, power supply unit, black
Raspberry Pi Foundation
RPI5NT5AB
Raspberry Pi 27W USB-C Power Supply, power supply unit, black

CHF 10.70
Available · 100+ piece · 2-5 days
Soldered Li-Ion Akku, Lithium-Polymer, 103048, 3,7V, 1500mAh mit 2 Pin JST Stecker Soldered Li-Ion Akku, Lithium-Polymer, 103048, 3,7V, 1500mAh mit 2 Pin JST Stecker
Soldered
SOL-333283
Soldered Li-Ion Akku, Lithium-Polymer, 103048, 3,7V, 1500mAh mit 2 Pin JST Stecker

CHF 8.15
Available · 33 piece · 2-5 days
NeoPixel Stick with 8 WS2812 5050 RGB LEDs NeoPixel Stick with 8 WS2812 5050 RGB LEDs

Average rating of 5 out of 5 stars

BerryBase
NEOPS8
NeoPixel Stick with 8 WS2812 5050 RGB LEDs

CHF 2.60
Available · 100 piece · 2-5 days
Slide switch, print mounting, ON-ON, 2-digit, 8.6x4.3x4mm, straight Slide switch, print mounting, ON-ON, 2-digit, 8.6x4.3x4mm, straight
C&K
SIS-86434-G
Slide switch, print mounting, ON-ON, 2-digit, 8.6x4.3x4mm, straight

CHF 0.70
Available · 38 piece · 2-5 days
Seeed Studio XIAO ESP32-S3, WiFi, Bluetooth 5.0 Mesh, 8MB PSRAM, Dual-Core 240 MHz, 6 MB Flash, 5V Seeed Studio XIAO ESP32-S3, WiFi, Bluetooth 5.0 Mesh, 8MB PSRAM, Dual-Core 240 MHz, 6 MB Flash, 5V
seeed
SE-ESP32-S3
Seeed Studio XIAO ESP32-S3, WiFi, Bluetooth 5.0 Mesh, 8MB PSRAM, Dual-Core 240 MHz, 6 MB Flash, 5V

From CHF 7.70
Available · 100+ piece · 2-5 days
USB 2.0 Hi-Speed OTG adapter cable, A socket - Micro B plug 0.15m white

Average rating of 4.93 out of 5 stars

BerryBase
125175
USB 2.0 Hi-Speed OTG adapter cable, A socket - Micro B plug 0.15m white

CHF 1.80
Available · 100+ piece · 2-5 days
Panasonic NCR18650GA lithium-ion battery, 3450mAh, flat-top

Average rating of 4.64 out of 5 stars

Panasonic
NCR18650GA
Panasonic NCR18650GA lithium-ion battery, 3450mAh, flat-top

CHF 5.95
Available · 100+ piece · 2-5 days
Raspberry Pi Active Cooler, fan for Raspberry Pi 5
Raspberry Pi Foundation
RPI5-ACOOL
Raspberry Pi Active Cooler, fan for Raspberry Pi 5

CHF 5.10
Available · 100+ piece · 2-5 days
Seeed XIAO ESP32-C6, Wi-Fi 6, BLE 5.0, Zigbee, Thread, 512KB SRAM, 4MB Flash, UART, SPI, RISC-V Seeed XIAO ESP32-C6, Wi-Fi 6, BLE 5.0, Zigbee, Thread, 512KB SRAM, 4MB Flash, UART, SPI, RISC-V
seeed
SE-XIAO-C6
Seeed XIAO ESP32-C6, Wi-Fi 6, BLE 5.0, Zigbee, Thread, 512KB SRAM, 4MB Flash, UART, SPI, RISC-V

From CHF 7.35
Available · 100+ piece · 2-5 days

Description

Product information "Waveshare 2.9" e-Paper module, 296x128, greyscale, SPI interface, 170° viewing angle, 3.3V"

Waveshare 12956, 2.9inch e-Paper Module
The Waveshare 2.9inch e-Paper Module is an electronic paper display with a resolution of 296 × 128 pixels and an integrated controller. It uses a serial SPI interface for communication and supports both full and partial image updates. The display operates without backlighting and retains the last displayed content even without a power supply. Due to its low power consumption, wide viewing angle and excellent readability in direct sunlight, the module is suitable for applications such as electronic shelf labels, industrial displays or battery-operated systems.

Thanks to its paper-like appearance, this display is particularly suitable for environments with changing light or low-power applications. The power consumption is largely limited to the update phases, which enables a long runtime with battery-powered operation. The module can be easily connected to control boards such as Raspberry Pi, Arduino or STM32 via the SPI interface.

The 2.9inch e-Paper module displays black and white content in two shades of grey. It does not require a backlight, but remains visible even without a power supply, as e-ink technology can hold the last display permanently. At rest, it consumes almost no power. An external controller such as a microcontroller board is connected via SPI. Sample codes for Raspberry Pi, Arduino and STM32 are included in the scope of delivery.

The display is suitable for electronic price tags, status displays in industrial environments or for projects where power consumption needs to be minimised. The high viewing angle stability over more than 170 degrees and the clear display in direct light enable versatile use in IoT, embedded systems or DIY applications.

The display can be used to show text, symbols or simple graphics. It works with a supply voltage of 3.3 V and uses the SPI interface to communicate with microcontrollers. No power is required to display an image, only to refresh the display. The display area measures approx. 66.89 mm × 29.05 mm. The module can be operated via a 3- or 4-wire SPI connection with the VCC, GND, DIN, CLK, CS, DC, RST and BUSY pins.

Features at a glance

  • E-Ink technology without backlight
  • Power consumption only when updating the image
  • Display is maintained even without power
  • Wide viewing angle >170°
  • Partial and full image refresh possible
  • Compatible with SPI-capable microcontrollers
  • Example codes for Raspberry Pi, Arduino, STM32
Compatibility with
  • Raspberry Pi
  • Arduino
  • STM32
  • Nucleo
Technical Data
  • Operating voltage: 3.3 V
  • Interface: 3-wire SPI, 4-wire SPI
  • External dimensions: 89.5 mm × 38 mm
  • Display size: 66.89 mm × 29.05 mm
  • Dot pitch: 0.138 mm × 0.138 mm
  • Resolution: 296 × 128 pixels
  • Displayable colours: Black, white
  • Grey scale: 2
  • Power consumption during refresh: 26.4 mV (typical)
  • Standby power consumption: <0.17 mV
  • Viewing angle: >170°
Other data
  • Interface pins: VCC, GND, DIN, CLK, CS, DC, RST, BUSY
Scope of delivery
  • 2.9inch e-Paper module
  • Cable XH2.54 20cm 8pin
Links to

Properties

Zolltarifnummer: 84733080
Brand: Waveshare
Country of Origin: China
EAN: 4060137035067
Gross Weight (kg): 0.032
Manufacturer ID: 2.9inch e-Paper Module
Product ID: EINKM-29

Manufacturer

Waveshare

Waveshare – high-quality modules for your Raspberry Pi

Waveshare Electronics from Shenzhen has been developing electronic modules for makers, education and industry since 2005. The brand is best known for its displays: from tiny OLEDs to ePaper and large touchscreens, Waveshare offers one of the widest ranges on the market.

What sets the brand apart is its consistent focus on popular platforms. Waveshare products are designed for Raspberry Pi, Arduino, ESP32 and similar boards, come with detailed wikis and sample code, and are usually ready to use straight away – which saves a lot of time when prototyping.

At BerryBase you will find a large selection of Waveshare products at fair prices. Whether display, camera, HAT or robot kit: with Waveshare you turn your single-board computer into a real all-rounder.

Manufacturer and safety information

Manufacturer information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com

WEEE number: 72769965

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de

Safety instructions
  • Avoid direct contact with water, moisture and extreme temperatures.
  • Protect the ePaper display from mechanical stress, impact and scratches.
  • Avoid static discharges that could permanently damage the module.
  • Only store and operate the product within the specified temperature ranges.
  • Ensure that the ePaper Display is connected correctly to avoid damage due to incorrect polarity or overvoltage.
  • Dispose of the ePaper Display in accordance with the regional regulations for electronic waste.
  • Keep the module away from any corrosive chemicals or solvents.
  • Do not disassemble or modify the product improperly.
  • Keep out of the reach of small children, as small parts can be swallowed.
  • Observe the recommended handling of flexible connections to avoid damage.

Reviews 1

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


1 review

16 September 2018 00:00

Review with rating of 5 out of 5 stars

Einwandfrei...

Einwandfrei

Skip product gallery

Accessories

BerryBase Elektronik Reinigungs-Set für Tastatur, Handy, Kopfhörer, Kameras, 20-teilig BerryBase Elektronik Reinigungs-Set für Tastatur, Handy, Kopfhörer, Kameras, 20-teilig
BerryBase
157078
BerryBase Elektronik Reinigungs-Set für Tastatur, Handy, Kopfhörer, Kameras, 20-teilig

CHF 7.90
Available · 52 piece · 2-5 days
BerryBase Mikrofaser Touchscreen Poliertuch, Display Reinigungstuch, doppellagig, waschbar, 16x16cm BerryBase Mikrofaser Touchscreen Poliertuch, Display Reinigungstuch, doppellagig, waschbar, 16x16cm
BerryBase
157079
BerryBase Mikrofaser Touchscreen Poliertuch, Display Reinigungstuch, doppellagig, waschbar, 16x16cm

CHF 3.90
Available · 90 piece · 2-5 days
Skip product gallery

Customers also viewed

Cable LiPo compatible with 2 pin JST PH 2.0mm connector, AWG26, 20cm

Average rating of 4.5 out of 5 stars

BerryBase
AK-PH20-LP2P
Cable LiPo compatible with 2 pin JST PH 2.0mm connector, AWG26, 20cm

CHF 0.33
Available · 100+ piece · 2-5 days
seeed Grove OLED display 0.66 inch seeed Grove OLED display 0.66 inch
seeed
SE-104020248
seeed Grove OLED display 0.66 inch

CHF 5.35
Available · 4 piece · 2-5 days
2.66 inch E-Paper E-Ink display module for Raspberry Pi Pico, 296×152, black/white 2.66 inch E-Paper E-Ink display module for Raspberry Pi Pico, 296×152, black/white
Waveshare
WS-20052
2.66 inch E-Paper E-Ink display module for Raspberry Pi Pico, 296×152, black/white

CHF 14.60
Available · 6 piece · 2-5 days
official housing for Raspberry Pi 5, red/white
Raspberry Pi Foundation
RPI5-CASE-RE
official housing for Raspberry Pi 5, red/white

CHF 9.90
Available · 100+ piece · 2-5 days
Analogue capacitive soil moisture sensor Analogue capacitive soil moisture sensor

Average rating of 4.33 out of 5 stars

BerryBase
CAP-SHYG
Analogue capacitive soil moisture sensor

CHF 2.60
Available · 100+ piece · 2-5 days
Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers
Raspberry Pi Foundation
RPI-PICO-WH
Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers

CHF 7.20
Available · 100+ piece · 2-5 days
4.2" 400×300 ePaper display module with SPI interface, three-colour (red, black, white) 4.2" 400×300 ePaper display module with SPI interface, three-colour (red, black, white)
Waveshare
3C-EINKM-42
4.2" 400×300 ePaper display module with SPI interface, three-colour (red, black, white)

CHF 31.85
Available · 5 piece · 2-5 days
40 pin GPIO header for Raspberry Pi, colour coded, simple version 40 pin GPIO header for Raspberry Pi, colour coded, simple version

Average rating of 4.91 out of 5 stars

BerryBase
RPI-CGPIOH-S
40 pin GPIO header for Raspberry Pi, colour coded, simple version

CHF 0.90
Available · 100+ piece · 2-5 days

Our recommendations for you

Loading...