Waveshare ESP32-S3 Touch-LCD, 4.3 inch, 800x480, LX7, WiFi, Bluetooth, 8MB PSRAM,I2C, 240Mhz
Product number: WS-25948
CHF 36.25
Currently not available
CHF 36.25
Customers also bought
Available · 46 piece · 2-5 Tage
.png?ts=1730377780){kind=logo}
Available · 100+ piece · 2-5 Tage
Available · 48 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 8 piece · 2-5 Tage
Available · 72 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Content: 160 Stück (CHF 0.04 / 1 Stück)
Available · 48 piece · 2-5 Tage
Available · 3 piece · 2-5 Tage
Available · 78 piece · 2-5 Tage
Available · 2 piece · 2-5 Tage
Available · 90 piece · 2-5 Tage
Available · 32 piece · 2-5 Tage
Available · 100+ piece · 2-5 Tage
Available · 4 piece · 2-5 Tage
Content: 240 Stück (CHF 0.02 / 1 Stück)
Available · 82 piece · 2-5 Tage
Description
Product information "Waveshare ESP32-S3 Touch-LCD, 4.3 inch, 800x480, LX7, WiFi, Bluetooth, 8MB PSRAM,I2C, 240Mhz"
The ESP32-S3 4.3 inch Capacitive Touch Display Development Board is a sophisticated development board designed for a wide range of applications. It offers a high resolution of 800×480, supports 5-point touch and is equipped with a 32-bit LX7 dual-core processor. In addition to integrated WiFi and Bluetooth, this board has a variety of components and interfaces for advanced projects.
Features at a glance
- Integrated RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces
- 2.4 GHz WiFi and BLE 5 support, integrated high flash and PSRAM capacity
- 4.3 inch capacitive touch display with a resolution of 800×480 and 65K colours
- Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
- Onboard CAN, RS485, I2C interface and TF card slot, integrated full-speed USB port
- Supports flexible clock, independent adjustment of module power supply and other controls to realise low power consumption in various scenarios
- Processor: ESP32-S3N8R8 SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash
- SGM2212-3.3: 800mA low-noise LDO
- FSUSB42UMX: For USB pin multiplexing
- Touch panel connection
- USB-to-UART Type-C port
- TJA1051T/3/1J: CAN interface chip
- CH422G: IO expansion chip
- BOOT button: Press and hold to programme when switching on
- RESET button
- MP3302DJ-LF-Z: Screen backlight boost chip
- 4.3 inch display panel connector
- TF card slot
- Sensor header
- CAN header
- I2C header
- RS485 header
- 3.7V single lithium battery PH2.0 header
- CAN terminal resistor selection
- RS485 terminal resistor selection
- CH343P: USB to UART chip
- SP3485: RS485 transceiver chip
- CS8501: Lithium battery charge manager
- Status indicators: PWR (power supply indicator), CHG (lithium battery charging indicator), DONE (lithium battery charging completed indicator)
- 1x ESP32-S3-Touch-LCD-4.3
- 2x HY2.0 2P to 2PIN male cable 10cm
- 1x HY2.0 2P to 3PIN male cable 10cm
- 1x HY2.0 2P to 4PIN male cable 10cm
- 1x spacer pack
Properties
| Zolltarifnummer: | 85437090 |
|---|---|
| Brand: | Waveshare |
| Country of Origin: | China |
| EAN: | 4060137089961 |
| Gross Weight (kg): | 0.300 |
| Manufacturer ID: | ESP32-S3-Touch-LCD-4.3 |
| Product ID: | WS-25948 |
Manufacturer
Waveshare
Waveshare: High quality modules for your Raspberry Pi
Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.
Waveshare provides an optimal view
You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.
For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.
If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.
Compact and of brilliant quality: The Waveshare 7 inch Display
The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.
At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.
Waveshare Game HAT: Turning your Raspberry Pi into a game console
One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.
If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.
Practical accessories for every purpose
By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.
Manufacturer and safety information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
support@waveshare.com
WEEE number: 72769965
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
info@berrybase.de
Safety instructions
- Avoid contact of the board with water, moisture or conductive materials.
- Only connect the board to the intended voltage sources (usually 3.3V or 5V); overvoltage can lead to damage.
- The board can generate heat during operation, avoid skin contact.
- Only work in well-ventilated areas, especially when soldering or testing components.
- Use suitable ESD protection (electrostatic discharge) when handling the board.
- Switch off the power supply before making any changes to the circuit.
- Do not leave the board unattended when it is externally powered.
- Dispose of the board in accordance with local regulations for electronic waste.
- Disconnect batteries or capacitors before disposing of the board.
- Return damaged boards to certified recycling centres or collection points for electronics.
Reviews 0
Login
Customers also viewed
Available · 61 piece · 2-5 Tage
Available · 11 piece · 2-5 Tage
Available · 25 piece · 2-5 Tage