Ethernet Shield für Arduino Uno / Mega 2560

  • AUNO-LANSH
  • |
  • 4251266704164
  • CHF 12.00

    inkl. MwSt. zzgl. Versandkosten

    Sofort verfügbar ab Zentrallager
    269 Stück · 3 - 5 Werktage

    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi pro Kunde erlaubt ist.

    Merken

    Wird oft zusammen gekauft:
    Ethernet Shield für Arduino Uno / Mega 2560
    Ethernet Shield für Arduino Uno / Mega 2560
    CHF 12.00
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
       
    CHF 12.80
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    CHF 1.35
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
       
    CHF 6.95
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    CHF 1.95
    =
    Gesamt:
    CHF 35.05*
    inkl.MwSt. inkl. Versandkosten
    Wird oft zusammen gekauft:
    Ethernet Shield für Arduino Uno / Mega 2560
    Ethernet Shield für Arduino Uno / Mega 2560
    CHF 12.00
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
       
    CHF 12.80
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    CHF 1.35
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
       
    CHF 6.95
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    CHF 1.95
    =
    Gesamt:
    CHF 35.05*
    inkl.MwSt. inkl. Versandkosten
    Overview The Arduino Ethernet is a microcontroller board based on the ATmega328. It has 14... mehr
    "Ethernet Shield für Arduino Uno / Mega 2560"

    Overview

    The Arduino Ethernet is a microcontroller board based on the ATmega328.
    It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack,
    an ICSP header, and a reset button. NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.
    An optional Power over Ethernet module can be added to the board as well.The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield. An onboard microSD card reader, which can be used to store files for serving over the network,
    is accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4. The 6-pin serial programming header is compatible with the USB Serial adapter and also with the FTDI USB cables or with Sparkfun and Adafruit FTDI-style basic USB-to-serial breakout boards. It features support for automatic reset, allowing sketches to be uploaded without pressing the reset button on the board. When plugged into a USB to Serial adapter, the Arduino Ethernet is powered from the adapter.

     

    Summary

    Microcontroller ATmega328
    Operating Voltage 5V
    Input Voltage Plug (recommended) 7-12V
    Input Voltage Plug (limits) 6-20V
    Input Voltage PoE (limits) 36-57V
    Digital I/O Pins 14 (of which 4 provide PWM output)
    Arduino Pins reserved:
      10 to 13 used for SPI
      4 used for SD card
      2 W5100 interrupt (when bridged)
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328)
    EEPROM 1 KB (ATmega328)
    Clock Speed 16 MHz
    W5100 TCP/IP Embedded Ethernet Controller
    Power Over Ethernet ready Magnetic Jack
    Micro SD card, with active voltage translators

     

    Dieses Shield wird komplett montiert geliefert.

     

    Weiterführende Links zu "Ethernet Shield für Arduino Uno / Mega 2560"
    Daten "Ethernet Shield für Arduino Uno / Mega 2560"
    Numéro d'article: AUNO-LANSH
    Gross weight (in kg): 0.028
    EAN/UPC: 4251266704164
    Fabricant: Frei
    Numéro du fabricant: AUNO-LANSH
    Numéro de tarif douanier: 85176990
    Pays d'origine: Chine
    Bewertungen lesen, schreiben und diskutieren... mehr
    Kundenbewertungen für "Ethernet Shield für Arduino Uno / Mega 2560"
    Bewertung schreiben
    Bewertungen werden nach Überprüfung freigeschaltet.
    Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

    Die mit einem * markierten Felder sind Pflichtfelder.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (CHF 0.14 / 1 Meter)
    CHF 1.35
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (CHF 0.20 / 1 Meter)
    CHF 1.95
    Zuletzt angesehen

    Jetzt zum passenden Shop wechseln

    Wir haben festgestellt, dass Sie sich nicht in der Schweiz befinden, und wir Ihnen in unserem Shop für Ihren Standort bessere Versandkonditionen anbieten können.