5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK583
  • CHF 60.95

    inkl. MwSt. zzgl. Versandkosten

    Sofort verfügbar ab Zentrallager
    4 Stück · 3 - 5 Werktage

    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi pro Kunde erlaubt ist.

    Merken

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Wird oft zusammen gekauft:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi,
    5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)
    CHF 60.95
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    CHF 18.00
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    CHF 5.00
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    CHF 16.80
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    CHF 8.00
    =
    Gesamt:
    CHF 108.75*
    inkl.MwSt. inkl. Versandkosten
    Wird oft zusammen gekauft:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi,
    5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)
    CHF 60.95
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    CHF 18.00
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    CHF 5.00
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    CHF 16.80
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    CHF 8.00
    =
    Gesamt:
    CHF 108.75*
    inkl.MwSt. inkl. Versandkosten
    Overview This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with... mehr
    "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Overview

    This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

    Features

    No backlight, keeps displaying last content for a long time even when power down
    Ultra low power consumption, basically power is only required for refreshing
    Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
    SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Specifications

    • Operating voltage: 3.3V~5V
    • Interface: SPI
    • Outline dimension: 125.40mm × 99.50mm
    • Display size: 118.80mm × 88.26mm
    • Dot pitch: 0.198 × 0.197
    • Resolution: 600 × 448
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 14s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°
    • Weight: 0.05 kg

    Interface
    SYMBOLDESCRIPTION
    VCC 3.3V~5V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active

    Lieferumfang:
    • 5.83inch e-Paper (B) x1
    • e-Paper Driver HAT x1
    • RPi screws pack (2pcs) x1
    • PH2.0 20cm 8Pin x1

    Dokumentation & Downloads
    Wiki : www.waveshare.com/wiki/5.83inch_e-Paper_HAT_(B)_
    Weiterführende Links zu "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Daten "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Codice articolo: 3C-RPI-EINK583
    Peso lordo (in kg): 0.143
    Dimensione dello schermo: 5,83 Zoll
    Fabbricante: Waveshare
    Numero del produttore: 5.83inch e-Paper HAT (B)
    Numero della tariffa doganale: 84733080
    Paese d'origine: China
    Bewertungen lesen, schreiben und diskutieren... mehr
    Kundenbewertungen für "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Bewertung schreiben
    Bewertungen werden nach Überprüfung freigeschaltet.
    Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

    Die mit einem * markierten Felder sind Pflichtfelder.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (CHF 0.14 / 1 Meter)
    CHF 1.35
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (CHF 0.20 / 1 Meter)
    CHF 1.95
    Zuletzt angesehen

    Jetzt zum passenden Shop wechseln

    Wir haben festgestellt, dass Sie sich nicht in der Schweiz befinden, und wir Ihnen in unserem Shop für Ihren Standort bessere Versandkonditionen anbieten können.