Sensori

The Grove - 1-Wire Thermocouple Amplifier (MAX31850K) is a thermocouple-to-digital converter with 14-bit resolution and cold-junction compensation. It can measure the values of temperature from -50°C to 600°C.

The Grove - PIR Motion Sensor(Passive Infrared Sensor) is an easy-to-use motion sensor with Grove compatible interface. Simply connecting it to Base Shield and programming it, it can be used as a suitable motion detector for Arduino projects.

Fast response Adjustable sensitivity Detects LPG, natural gas, town gas etc. Useful for gas leakage detection Grove compatible interface

The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331. The ACS70331EESATR-005B3 is Allegro?s high sensitivity, current sensor IC for <5 A current sensing applications.

Grove - Infrared Reflective Sensor v1.2 can be used for the detection of proximity and color of objects. The reflective photosensor - RPR-220 used in this module consists of an infrared light emitting diode and a high ?sensitivity phototransistor.

The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm

Grove compatible interface Arduino library ready Resistance Tolerance: ±1% 3.3/5V working voltage

Up to 1ppm high sensibility Built with VOC sensor WSP2110 Covers HCHO, Benzene,Toluene, Alcohol etc Grove connector compatible Easy to use

Grove - 3-axis Gyro module based on ITG 3200

Fast response Adjustable sensitivity Covers LPG, i-butane, methane, alcohol, Hydrogen etc Useful for gas leakage detecting Grove connector compatible

The tilt-switch twig is the equivalent of a button, and is used as a digital input

Der Grove Formaldehyd-Sensor kann Formaldehyd im Bereich von 0~1000 ppb mit geringer Querempfindlichkeit gegenüber Alkohol und hoher Stabilität von 6 Jahren Lebensdauer nachweisen. Der eingebaute RHT-Sensor sorgt dafür, dass er auch bei unterschiedlichen Temperaturen und Luftfeuchtigkeiten einwandfrei funktioniert. Die Daten werden über UART- und I2C-Ports übertragen.

The infrared thermal imaging module has a 16x4 resolution array temperature sensor (MLX90621), which can detect the temperature of the object with an accuracy of ±1°C ±3% * |To-Ta|, Where To is the measured surface temperature of the object, and Ta is the temperature of the sensor itself. The module can use the I2C protocol to obtain low-resolution images from the camera. The field of view (FOV) of this camera is 120°x25°, the temperature measurement range is -20°C?300°C, and the working temperature is that the sensor's Ta value is between -40°~85°. fdslkjlk fdskl

The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensor based on Sharp GP2Y0A21YK, which is a wide-angle distance measuring sensor. This proximity sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30").

The Grove 6 ? Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output

The Grove-VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.

Grove - Time of Flight Distance Sensor-VL53L0X is a high speed, high accuracy and long-range ToF distance sensor based on VL53L0X.

Grove - Wärmebildkamera ist ein Wärmesensor, der das MLX90640 IR-Array trägt. Die Kamera kann dynamische Wärmebilder darstellen und die Umgebungstemperatur von -40°~300° erkennen. Die Kamera ist mit einem Weitwinkel ausgestattet und hat ein FOV von 110°x75°.

Grove - BMP280 I2C and SPI Barometric and Temperature Sensor is built around Bosch BMP280. It is a low-cost and high-precision environmental sensor measures the temperature and barometer. Grove - BMP280 supports both I2C and SPI communication and we provide the BMP280 Arduino library.

This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. It has three detection modes to take your readings (infrared mode, full-spectrum, and human visible mode) and can be used to measure the change in light intensity in various light situations with many popular microcontrollers.

Capable of withstand strong impact Wide dynamic range from 0.001Hz to 1000MHz Adjustable sensitivity Cost effective Grove connector compatible

Preiswerte Lithium-Polymer-Akkus haben die Elektronik revolutioniert - sie sind dünn, sie sind leicht, sie können bis auf 3,3 V heruntergeregelt werden und sie sind einfach aufzuladen. Auf Ihrem Telefon gibt es ein kleines Bild einer Batteriezelle, das Ihnen den Prozentsatz der Ladung anzeigt - so wissen Sie, wann Sie es unbedingt einstecken müssen und wann Sie ungebunden bleiben können. Der Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitormacht dasselbe. Schließen Sie ihn an Ihren Lipoly- oder LiIon-Akku an und er zeigt Ihnen die Spannung der Zelle an, er macht die lästige Mathematik der Dekodierung der nicht-linearen Spannung, um Ihnen auch...

Grove - Integrated Pressure Sensor Kit (MPX5700AP) is made for measuring pressure in the range of 15Kpa to 700Kpa, which is perfectly suitable for making your own Arduino air pressure measurement system.

Grove - 3-Axis Digital Accelerometer ±16g Ultra-low Power (BMA400)

Der Grove Wasserstandssensor ist ein sehr genauer Sensor, der bei Anwendungen zur Wasserstandserfassung hilfreich sein kann. Er ist vollständig wasserdicht und verwendet kapazitive Pads, um Wasserstände bis zu 10 cm zu erkennen.

Wide spectral range from 200nm to 400nm Stable and good sensitivity Compact design Low power consumption Grove compatible interface

Grove - I2C High Accuracy Temp&Humi Sensor(SHT35), temperature, humidity, temperature sensor, humidity sensor, Temperature&Humidity, Temperature and Humidity

The Grove - Capacitive Fingerprint Scanner is a small size, low power consumption, high-reliability Arduino fingerprint sensor.

Provided a high-sensitivity RFR-359F photo-reflector, Grove - IR Distance Interrupter v1

This IR thermal camera carries a 16x12 array of thermal sensors (MLX90641) and it can detect the temperature of objects from far away with a centre area accuracy of ±1? and average accuracy of ±1.5?. In order to obtain the thermal images easily, the I2C protocol is used to get the low-resolution images from the camera. The FOV (Field of View) of this camera is 110°x75°, and the temperature measurement range is -40? to 300?.

The ADXL335 is a triple axis MEMS accelerometer with a low power consumption of 150 ?A in the measurement mode! This analog accelerometer is a low g accelerometer with a minimum full-scale range of ±3 g.  The ADXL335 can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

Measuring both temperature and humidity Supports 3.3V and 5V dual working voltage Low power consumption High reliability and stability I2C Grove compatible interface

FEATURES? Wide Temperature Detecting Range - 40 to 85°C for sensor temperature - 40 to 115°C for object temperature? High accuracy of 1°C over wide temperature? Measurement resolution of 0

The Grove - 3-Axis Analog Accelerometer ±20g (ADXL356B) is a analog output industrial grade, high stability, high precision and low power ADI ADXL series three-axis accelerometers.

Grove - Analog Microphone is based on high-performance SiSonic MEMS technology, it offers extremely-low-noise, low-current, reliable, and it has improved performance under severe conditions with excellent sensitivity.

Das Infrarot-Thermometermodul verfügt über einen Einpunkt-Infrarot-Temperatursensor (MLX90641) in medizinischer Qualität, der die Temperatur von Objekten mit einer Genauigkeit von ±0,2 °C im Bereich der Körpertemperatur erfassen kann. Bei Raumtemperatur kann die Oberflächentemperatur des gemessenen Objekts in einem weiten Bereich eine Genauigkeit von ±0,5 °C erreichen. Das Modul kann das I2C-Protokoll verwenden, um Daten von der Kamera zu erhalten. Das Sichtfeld (FOV) dieses Sensors beträgt 35°, der Temperaturmessbereich liegt bei -70°C-380°C, und die Arbeitstemperatur liegt bei einem Ta-Wert des Sensors zwischen...