pHAT Stack, GPIO Verteiler für Raspberry Pi - Lötversion

  • PIM321
  • |
  • 0606034876354
  • Dieser Artikel steht derzeit nicht zur Verfügung!
    Benachrichtigen Sie mich, sobald der Artikel lieferbar ist.
    CHF 14.15

    inkl. MwSt. zzgl. Versandkosten

    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi pro Kunde erlaubt ist.
    A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of... mehr
    "pHAT Stack, GPIO Verteiler für Raspberry Pi - Lötversion"
    A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.
    pHAT Stack is the big brother to the Mini Black HAT Hack3r. It has 6 sets of 2x20 pin headers, one for connecting to your Pi with the included ribbon cable, and the other 5 for a mix of HATs and/or pHATs. The kits include rubber feet to hold pHAT Stack steady (and prevent it from scratching your desk), and metal standoffs to mount your HATs and pHATs firmly in a more permanent fashion. Note that you'll need to ensure that there aren't any pin clashes between the boards that you're using together. To check which pins are used by each board, check them on pinout.xyz, or try the pHAT Stack configurator!

    Features
    - Five sets of 2x20 pin headers (plus one to connect to your Pi)
    - HAT and pHAT mounting holes (M2.5) and labels
    - Handy pinout, including BCM numbers and descriptive labels

    Kits include
    - pHAT Stack PCB
    - 6x 2x20 male GPIO pins (pre-soldered in fully assembled kit)
    - 5x pairs of black brass standoffs
    - 4x rubber non-slip feet
    - 40-way black GPIO ribbon cable
    - Provided there aren't any clashes between the pins used by HATs and pHATs, you can get pretty crazy with the boards that you combine together.

    Notes
    - Solder yourself and PCB only kits require soldering
    - When using HATs, be careful not to short pins on components on the underside of the HATs. A couple of pieces of insulating tape on the underside of the board can protect against this.
    - Board dimensions: 162x65x1.75mm(LxWxH)
    Weiterführende Links zu "pHAT Stack, GPIO Verteiler für Raspberry Pi - Lötversion"
    Daten "pHAT Stack, GPIO Verteiler für Raspberry Pi - Lötversion"
    Artikelnummer: PIM321
    Gewicht Brutto (in kg): 0.100
    EAN: 0606034876354
    Hersteller: Pimoroni
    Hersteller Produktnummer: PIM321
    Zolltarifnummer: 85366990
    Herkunftsland: Großbritannien
    Bewertungen lesen, schreiben und diskutieren... mehr
    Kundenbewertungen für "pHAT Stack, GPIO Verteiler für Raspberry Pi - Lötversion"
    Bewertung schreiben
    Bewertungen werden nach Überprüfung freigeschaltet.
    Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

    Die mit einem * markierten Felder sind Pflichtfelder.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (CHF 0.14 / 1 Meter)
    CHF 1.35
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (CHF 0.20 / 1 Meter)
    CHF 1.95
    Mini Protoboard Mini Protoboard
    ab CHF 1.10
    Zuletzt angesehen

    Jetzt zum passenden Shop wechseln

    Wir haben festgestellt, dass Sie sich nicht in der Schweiz befinden, und wir Ihnen in unserem Shop für Ihren Standort bessere Versandkonditionen anbieten können.